On 04/14/2011 03:08 PM, Mark Colin wrote: > Hi Don W, > > thank you very much, I uninstalled the old one and installed the new one > version 1.0, but unfortunatelly it doesn't change anything. I can see in > DeviceManager the libusb (WinUSB) devices -> Ettus Research LLC USRP1 > (VID=FFFE; > PID=0002; REV=0004). If I run uhd_find_devices.exe the result is the same as > before, no error, from ...\UHD\bin>uhd_find_devices.exe comes back to > ...\UHD\bin>, so it's a situation of everything is installed but nothing > works. > Anyway thank you very much for the information. >
Just to verify things, I decided to try this out on an old XP laptop. I installed uhd and set my UHD_IMAGE_PATH, updated the driver to the WinUSB. The probe and find devices worked just fine. I recommend you try a different computer, a different usb cable, or a different os. Just to eliminate the variables. You only need to install uhd to test this. On the gnuradio front. I updated my instructions a bit. I found that the qt dlls also needed to be in the path. I will try to include these in the gnuradio installer next time around. Also, I had to install to program files (x86) because thats how all the paths got hardcoded. I'm not sure how to transplant a gnuradio install that was built for a different prefix. We should probably make this simpler. -Josh _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
