Matt - Are there schematics available for the SBX daughterboard? I can't find them in the usual places.
Thanks, Tyrel On Apr 15, 2011, at 11:21 AM, Matt Ettus wrote: > > ========================================================================= > > Ettus Research is proud to announce that the SBX transceiver > daughterboard is now available for purchase. The SBX has the following > performance characteristics: > > - 400 MHz to 4.4 GHz frequency coverage > - +16 to +20 dBm TX output power, with 32dB of power control range > - 0 dBm IIP3 on Receive > - 5-7 dB NF below 3 GHz, 7-10 dB NF between 3 and 4 GHz, 10-13 dB NF > between 4 and 4.4 GHz. > - Full duplex capable > - Fully supported by the UHD driver system > - Works with the entire USRP family (*) > > > (*) USRP1 systems with serial number lower than 500 will need a > modification to work with the SBX. All other USRP1, USRP2, N200, N210, > E100, and E110 systems will work without modification, as long as you > are using the UHD drivers. > > You can see a picture of the SBX here: > > http://www.ettus.com/images/SBX.JPG > > The SBX costs $475 and can be purchased from our Orders web page: > > http://www.ettus.com/order > > ========================================================================= > > Matt Ettus > President, Ettus Research LLC > > > > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list [email protected] http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
