Hi all, I really screwed up today when I upgraded from F13 to F14 result, no network, access denied to every device (RAID), etc. I was able to burn (backup) sources to disk and then formatted from latest F14.
I run into probs when installing the traditional USRP1 without uhd. Configure seems to expect sdcc v2 but the latest is 3. Another observation, configure used to build both USRP1/2. Now USRP2 seems to be the only availabel by default, that is understandable. Snips from terminal output: ./configure --enable-usrp --enable-gr-usrp configure: Using LIBUSB version 'libusb' checking for sdcc... sdcc -mmcs51 --no-xinit-opt checking for asx8051... no USRP requires sdcc version 2. sdcc not found. See http://sdcc.sf.net Unable to find firmware compiler SDCC. configure: error: Component usrp has errors; stopping. sdcc -v SDCC : mcs51/gbz80/z80/ds390/pic16/pic14/TININative/ds400/hc08 3.0.0 #6037 (Mar 20 2011) (Linux) I suspect this is the problem, 2 vs 3? Another snip from terminal output: ./bootstrap ./configure config.status: executing depfiles commands ********************************************************************* The following components were skipped either because you asked not to build them or they didn't pass configuration checks: usrp2-firmware These components will not be built. ********************************************************************* The following GNU Radio components have been successfully configured: config gruel volk gnuradio-core usrp2 gr-usrp2 gr-msdd6000 gr-audio gr-atsc gr-cvsd-vocoder gr-gsm-fr-vocoder gr-noaa gr-pager gr-radio-astronomy gr-trellis gr-video-sdl gr-wxgui gr-qtgui gnuradio-examples grc docs You my now run the make command to build these components. ********************************************************************* The following components were skipped either because you asked not to build them or they didn't pass configuration checks: gcell usrp gr-usrp gr-gcell gr-comedi gr-gpio gr-radar-mono gr-sounder gr-utils gr-uhd These components will not be built. Configured GNU Radio release v3.4.0git-139-gf53fef3d for build. Patrik
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
