Hi Tom, By switching to v2 GR configures both USRP:s by default, no need to add --enable-usrp in configure My error.
Patrik ----- Original Message ----- From: Tom Rondeau To: Patrik Tast Cc: [email protected] Sent: Monday, May 16, 2011 11:58 Subject: Re: [Discuss-gnuradio] F14 GR traditional usrp install (no uhd) On Sun, May 15, 2011 at 7:01 PM, Patrik Tast <[email protected]> wrote: Hi all, I really screwed up today when I upgraded from F13 to F14 result, no network, access denied to every device (RAID), etc. I was able to burn (backup) sources to disk and then formatted from latest F14. I run into probs when installing the traditional USRP1 without uhd. Configure seems to expect sdcc v2 but the latest is 3. Yes, the USRP component requires SDCC version 2 (as your follow-up email indicated). They made more than just a trivial name change in version 3 that does not work properly with the USRP code. I have no plans to update it to compile with version 3, either. Of course, is someone else really wants to and submits a patch to us, I'd be happy to include it (we would still require that it build with version 2 just like it is, though). Another observation, configure used to build both USRP1/2. Now USRP2 seems to be the only availabel by default, that is understandable. I'm not sure what you mean by this. There hasn't been any change the default for building USRP or USRP2. Tom Snips from terminal output: ./configure --enable-usrp --enable-gr-usrp configure: Using LIBUSB version 'libusb' checking for sdcc... sdcc -mmcs51 --no-xinit-opt checking for asx8051... no USRP requires sdcc version 2. sdcc not found. See http://sdcc.sf.net Unable to find firmware compiler SDCC. configure: error: Component usrp has errors; stopping. sdcc -v SDCC : mcs51/gbz80/z80/ds390/pic16/pic14/TININative/ds400/hc08 3.0.0 #6037 (Mar 20 2011) (Linux) I suspect this is the problem, 2 vs 3? Another snip from terminal output: ./bootstrap ./configure config.status: executing depfiles commands ********************************************************************* The following components were skipped either because you asked not to build them or they didn't pass configuration checks: usrp2-firmware These components will not be built. ********************************************************************* The following GNU Radio components have been successfully configured: config gruel volk gnuradio-core usrp2 gr-usrp2 gr-msdd6000 gr-audio gr-atsc gr-cvsd-vocoder gr-gsm-fr-vocoder gr-noaa gr-pager gr-radio-astronomy gr-trellis gr-video-sdl gr-wxgui gr-qtgui gnuradio-examples grc docs You my now run the make command to build these components. ********************************************************************* The following components were skipped either because you asked not to build them or they didn't pass configuration checks: gcell usrp gr-usrp gr-gcell gr-comedi gr-gpio gr-radar-mono gr-sounder gr-utils gr-uhd These components will not be built. Configured GNU Radio release v3.4.0git-139-gf53fef3d for build. Patrik _______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
