I would like to run two USRP2's as master and slave, and I would like to only use a 1PPS on the master (each USRP2 would be controlled by two separate processes). When I run the test_pps_input on the slave, the program fails. However, the master is able to find the PPS just fine. I've tried a combination of running the master, then running the slave/running the master at the same time as the slave/running the slave then the master/etc with no luck. I think short of probing the pins on the MIMO cable or perusing the FPGA code (which I believe is not available to the public), I'm pretty much out of ideas.
One thought I had was that adjusting from clock_config_t::internal to external might help, but on further review of the code, the PPS does not appear to be affected by this. I have seen some posts about this, but none after January 20th (the most recent UHD announcement about MIMO upgrades). Any Thanks in advance, David
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
