Thanks for the reply Josh.
However, I'm confused by all the frequency setting/tuning functions at our
disposition. In my example,
1)I am setting cordic-freq (set by parser) while calling the main program, e.g.
-c 2450000000 -that's the frequency I want to set my USRP to.
2)output of
self.u.set_center_freq(options.cordic_freq, 0)
print "Center frequency: %d" %(self.u.get_center_freq())
is:
Center frequency: 2450000000
3)output of
uhd.tune_request(options.cordic_freq, 0)
print "Center frequency: %d " %(self.u.get_center_freq())
print ("%s") %(uhd.tune_result())
is:
Center frequency: 2600000000
Tune Result:
Target RF Freq: 0.000000 (MHz)
Actual RF Freq: 0.000000 (MHz)
Target DSP Freq: 0.000000 (MHz)
Actual DSP Freq: 0.000000 (MHz)
Why is uhd.tune_request setting the center frequency to 2.6 instead of 2.45 GHz?
Also, am I calling the uhd.tune_result function wrong - why are all the values
0?
Furthermore, what is the difference between
self.u.set_center_freq(options.cordic_freq,0).actual_rf_freq and
self.u.set_center_freq(options.cordic_freq,0) functions?
Regards,
Kresimir
-----Original Message-----
From: [email protected] on behalf of
Josh Blum
Sent: Mon 5/23/2011 12:54 AM
To: [email protected]
Subject: Re: [Discuss-gnuradio] UCLA Zigbee PHY examples updated for UHD
>> Blocked waiting for GDB attach (pid = 5466)
>> Press Enter to continue:
>> cordic_freq = 2.45G
> Not sure whats wrong, but, cordic_freq should be the error in tuning the
> RF center freq, so only a few kHz really. That may be a good place to
> start looking.
>
> -josh
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
