On 05/31/2011 08:07 PM, hafiz zimran wrote:
Thanks for help.
I have installed C++ Compiler and followed the instructions as given in
http://www.ettus.com/uhd_docs/manual/html/build.html
Now I have connected usrp2 to PC ( Ubuntu 10.04, gnuradio-3.2.2) and
run the command sudo uhd_find_devices and getting the error "command
not found".
Wether I have to reinstall GNU Radio again to work with UHD or some
extension of GNURadio
Waiting for response
Zimran Rafique
You don't have UHD installed, almost for sure. Unless you are "wedded"
to gnuradio-3.2.2 for some reason, then I would do a "start over".
My advice would be to use the "build-gnuradio" script:
http://www.sbrac.org/files/build-gnuradio
Which will do a number of useful things:
o install all the necessary pre-requisites, using "apt-get" or
"yum", depending on system
o remove any binary installs of Gnu Radio that may be present and
that will interfere with upgrading to a installed-from-source version
o download build and install the latest UHD
o download build and install the latest Gnu Radio, configured to
support UHD
o download the latest firmware/fpga images and place them in the
/usr/local/share/uhd/images directory
Once this is complete, you'll need to burn new firmware/fpga images into
the SD card for your USRP2, which will involve using the
/usr/local/share/uhd/utils/usrp2_card_burner_gui.py program to burn
new images into your SD card. You'll need an SD card reader/writer.
They're now so cheap that my local dollar store carries them.
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
