I had my USRP2 running usrp2_fft fine for awhile although it was crashing frequently in my ubuntu 10.04LTS VM. I then tried to get our new N200 working which requires UHD so I used the build script at:
http://www.sbrac.org/files/build-gnuradio I think the rebuild went okay though not sure I should have run sudo ./build-gnuradio and I had to comment out the stuff about timestamp_timeout in the sudoers file as I couldn't figure out how to modify. At any rate the build went to completion. If I run uhd_fft.py it seems to be running and I can watch the UDP packets on wireshark except the problem is all the data is zeros. The packets seem to be the correct size and rate, just data is all zeros. When I close the gui I get: UHD Error: An unexpected exception was caught in a task loop. The task loop will now exit, things may not work. unknown exception Also if I run uhd_usrp_probe I get: linux; GNU C++ version 4.4.3; Boost_104000; UHD_003.002.000-117f6a3 -- Opening a USRP2/N-Series device... -- Current recv frame size: 1472 bytes -- Current send frame size: 1472 bytes UHD Error: An unexpected exception was caught in a task loop. The task loop will now exit, things may not work. unknown exception Error: TypeError: Cannot wax cast N5boost10shared_ptrIN3uhd13property_treeEEE to N5boost10shared_ptrIN3uhd13property_treeEEE boost::bad_any_cast: failed conversion using boost::any_cast Note that the USRP2 also is only sending out packets with data as zero. I just built this today and I see there was new release yesterday so maybe I shouldn't be going from source. Maybe there's apt-get that has uhd for USRP N200? Otherwise, any help to resolve the uhd issue is appreciated. Thanks _______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
