On 14/09/11 09:31 PM, Page Jack wrote: > Why no one have the answer or have the same question? 99.9% of the people on this list have no experience building the firmware or making modifications to it, they just use the as-supplied firmware.
The way the fpga code is setup, it's intended to be built with "make" rather than the vendors IDE, so it doesn't surprise me that you get topology-related errors. But that's as much as I know. I've never built it myself. Also, the way FPGA "routers" work, there's a certain amount of Monte-Carlo decision making done in the way paths are laid out. So two different "runs" with exactly the same codebase can yield different (but functionally identical) FPGA binaries. The same thing happens with PCB routers--press the "route" button, it will be very often route the same circuit/physical placement with different lines. > > On Fri, Aug 12, 2011 at 9:52 AM, Page Jack <[email protected] > <mailto:[email protected]>> wrote: > > Hi all, > I have some problems when compile the fpga source. > I open uhd-git\fpga\usrp1\toplevel\usrp_std\usrp_std.qpf with > quartus II > then compile meet a lot of errors which is the path error like that: > Error (10054): Verilog HDL File I/O error at rx_buffer.v(25): > can't open Verilog Design File > "../../firmware/include/fpga_regs_common.v" > when I fix the path problem then compile success. but the > generated rbf file is different from the one in rbf directory. > I use the newest git version. > > Regards! > > > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > -- Principal Investigator Shirleys Bay Radio Astronomy Consortium http://www.sbrac.org
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
