Hello all, I am here once again and would like to bother you a bit. I am using the usrp2_rx_cfile.py command to get the IQ data from usrp2. I am using the following command
sudo python usrp2_rx_cfile.py -f 800M -d 496 -s -v -N 10 /home/gnuradio4/Desktop/observed_data/test.dat And I am getting the following output: Network interface: eth0 USRP2 address: 00:50:c2:85:35:7d Using RX d'board id 0x0053 Rx gain: 15.75 Rx baseband frequency: 800M Rx DDC frequency: 0 Rx residual frequency: 0 Rx decimation rate: 512 Rx sample rate: 195.312k Receving 10 samples Writing 16-bit complex shorts Output filename: /home/gnuradio4/Desktop/observed_data/test.dat In the above, it shows that the sample rate is 195.312k. I want to raise this rate but it seems that decimation rate has a limit upto 512 so i cant do that. Can you suggest me any other way to raise the sample rate? In fact I want the time difference between each sample to be around 100us, but sample rate 195k gives me 5us. Thank you. -- View this message in context: http://old.nabble.com/usrp2_rx_cfile.py-issue-tp32860995p32860995.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
