Noted... but in my defence the questions were asked to aid my understanding of what is happening in the (stock) UHD code... the background was to explain why I was bothering.
-----Original Message----- From: Marcus D. Leech [mailto:[email protected]] Sent: 30 November 2011 23:54 To: Suleja, Lukasz; [email protected] Subject: Re: [Discuss-gnuradio] Raw Samples from Receiver > As background, I have 10 32-bit words of "metadata" prefixed to a burst > of complex samples and I need to extract (and remove) them. I noticed > recently that the trunk has some code related to tagging; in your > opinion would the transport of my "metadata" be better done using > tagging or is there an alternative method you can suggest. It is > important that the "metadata" remain associated exactly with the burst > samples. > So, a friendly note that if you're running non-standard firmware/FPGA, you should note that earlier, rather than later, when you're asking for help from this list. 99% of the folks on this list use the as-shipped FPGA/Firmware that is compatible directly with gr-uhd/Gnu Radio. So when a question is asked the "context" that most answerers have is the as-shipped FPGA/Firmware. Which is why I delivered my "lecture" about ADC samples getting mangled by the decimators in the FPGA, and why would you care, etc, etc. -- Marcus Leech Principal Investigator Shirleys Bay Radio Astronomy Consortium http://www.sbrac.org -- Queen's Award for Enterprise and Innovation 2011 Roke Manor Research Ltd Romsey, Hampshire, SO51 0ZN, United Kingdom http://www.roke.co.uk Part of the Chemring Group Registered in England & Wales at: Chemring Group PLC, Chemring House, 1500 Parkway, Whiteley, Fareham, Hampshire PO15 7AF, ENGLAND. Registered No: 267550 ------------------------------------------------------------------------ The information contained in this e-mail and any attachments is proprietary to Roke Manor Research Ltd and must not be passed to any third party without permission. This communication is for information only and shall not create or change any contractual relationship. ------------------------------------------------------------------------ Please consider the environment before printing this email _______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
