This question is directed to Josh Blum, but if anyone can comment, it
would be welcome:
I tried the calibration apps this evening on a B100 and a Rev3 N210.
See http://files.ettus.com/uhd_docs/manual/html/calibration.html
The B100 worked like a champ and all three calibration procedures completed.
Unfortunately, when I tried the procedure on my N210, it failed,
reporting that the LO failed to lock in a timely manner. Output pasted
below:
spacequest@sq-macbp:~$ sudo /usr/local/bin/uhd_cal_rx_iq_balance --verbose
linux; GNU C++ version 4.5.2; Boost_104200; UHD_003.004.000-7dc76db
Creating the usrp device with: ...
-- Opening a USRP2/N-Series device...
-- Current recv frame size: 1472 bytes
-- Current send frame size: 1472 bytes
Error: timed out waiting for TX and/or RX LO to lock
The N210 does work in flowgraphs and other applications and I have
verified that the lo locks in a flowgraph by probing the
get_dboard_sensor function.
I have a WBX in both units. I am running the very latest master of both
GR and UHD. Both units have the latest FPGA code and firmware.
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
