I'm working on an application that will do full-duplex using an RFX2200 daughterboard in a USRP1.
The transmit frequency will be about 2.055 GHz, and the receive freq will be about 2.255 GHz. Up until now, we've been working with only the transmit or the receive flowgraph separately. Now we're about to integrate the two and I have concerns. In the lab, the transmit and receive sides will be hooked to separate antennas. I am aware that the input to the receiver should not exceed -10dBm in order to avoid damaging it. I'm concerned that the transmit antenna will be a short distance away, blasting out 100mW (+20dBm). Am I right to be concerned? By my rough back-of-the-napkin calculations, with 3dB antennas, and about 1 1/2 meters separation, I should be between -20 dBm and -10 dBm at the receiver. @(^.^)@ Ed _______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
