Does anyone know if the QAM demodulator code is working properly? I would like to get a QAM demodulator working for a symbol rate of 300ksym/s. I don't know whether I am just using the wrong parameters or if the blocks do not work properly, but I am not getting the results I expect.
To test the code out I am using the GRC. I have a vector source with a known data sequence running into the qam mod block and then the output of that into a QAM demod block. The output of the QAM demod is running into a Uchar to Float, and I am plotting the results on a WX GUI Scope. I have the exact same settings on both the QAM mod and demod blocks. The output I am seeing on the scope looks completely random. (I also tried other vector source data: When the input is 0x0F, repeating, the output I see is 00001010 repeating. But when I use 0x0E, the results are random again.) I have also tried demodulating a real QAM signal with a known data sequence, also to no avail. I have been working on this for about a month now and haven't had any success. I have examined the underlying QAM.py and generic_mod, generic_demod codes, and they seem to be written properly. But I am not getting the expected results. Any help with this problem or advice you can give will be greatly appreciated, and I will return the favor by helping out in any way that I can. Thank you very much in advance, Jeff
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
