All,
I have been playing with two simple flow-graphs in gnuradio-companion, one for
dbpsk transmitter and other for dbpsk receiver. The transmitter flow-graph is:
vector source -- > packet encoder -- > dpsk modulator -- > uhd: usrp sink
The receiver flow-graph is:
uhd: usrp source --> low-pass filter --> dpsk demodulator --> packet decoder
--> file sink
The vector source is given a vector {10,20,30} as input, repeat is set to
"yes"; in the packet encoder, samples/symbols is set to 8, bits/symbols is set
to 1 (because dbpsk scheme is to be used), pad for usrp is set to "yes" and
payload is set to "0"; in the dpsk modulator, samples/symbols is set to 8 and
all other parameters are left unchanged.
At the receiver, I use matching/appropriate parameters inside the dpsk
demodulator and low-pass filter blocks. And the sampling rate is set to be 1M
Sps on both transmitter and receiver.
Now, the issue is that I do not receive any decoded symbols in the file sink.
Previously, when I was running the two flow-graphs on two computers with Ubuntu
11.04 and gnuradio-3.4 on them, everything was just fine, but as soon as I have
upgraded the OS and gnuradio to 11.10 and 3.5 versions, I do not get anything
in the file sink.
Could someone provide a suggestion in this regard?
Thanks.
Jon _______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
