Hello Vivian, I was able to solve the problem. The encoder and decoder blocks seem to only work with certain modulation blocks. You should try changing your modulation type to GMSK. We have being able to transmit text and picture files with this set up.
Sam On Wed, Apr 25, 2012 at 7:14 AM, Vivian Paola Triana Galeano < [email protected]> wrote: > > Hi Samuel! > > I haven't solved it yet. I tried to set center frequency with a slider to > vary a little bit the frequency of the receiver, but it didn't work. > Have you solved the problem? > > Thanks! > > Vivian Triana > > > > 2012/4/19 Samuel Ibarra <[email protected]> > >> Hello Vivian, >> >> I have also had this problem, but I haven't being able to solve it. Could >> you please let me know if your able to solve it? I would greatly appreciate >> your help. >> >> Sam >> >> On Thu, Apr 19, 2012 at 7:41 AM, Vivian Paola Triana Galeano < >> [email protected]> wrote: >> >>> I'm using non-differential modulation. But I used differential before >>> and it didn't work neither. I think my problem is with the sample rate that >>> I have to set in UHD_USRP Sink and Source Blocks. I try to send a wav file >>> that has maximum frequency of 12kHz so I set the sample rate at 28kHz, >>> however it didn't. I need understand what the sample rate refers to. >>> >>> Thansks in advance for helping me! >>> >>> >>> >>> 2012/4/19 Tom Rondeau <[email protected]> >>> >>>> On Wed, Apr 18, 2012 at 11:32 AM, Vivian Paola Triana Galeano >>>> <[email protected]> wrote: >>>> > I'm working with USRP1 daughterboard RFX 2400 MHz. >>>> > The configuration of the parameter in UHD_USRP block is sample rate= >>>> 1MHz >>>> > Center freq=2.4GHz. >>>> >>>> Vivian, >>>> Are you using differential or non-differential modulation? Over the >>>> air, the phase ambiguity at the receiver does not get worked out, so >>>> it will only work if you use differentially encoded symbols. >>>> >>>> Tom >>>> >>>> >>>> > 2012/4/18 Edmar Candeia Gurjao <[email protected]> >>>> >> >>>> >> Hi Vivian, >>>> >> >>>> >> give us details about your set up, like what USRP you are using, >>>> >> daughterboads and frequency of transmission, >>>> >> >>>> >> Edmar >>>> >> >>>> >> 2012/4/18 Vivian Paola Triana Galeano <[email protected]>: >>>> >> > >>>> >> > I think my problem has something to do with the parameters of the >>>> USRP. >>>> >> > >>>> >> > I try to send a file modulated with BPSK. So I build a graph like >>>> this >>>> >> > : >>>> >> > >>>> >> > File source -> Packet Encoder -> PBSK MOD -> PBSK DEMOD -> Packet >>>> >> > Decoder -> >>>> >> > File sink >>>> >> > >>>> >> > >>>> >> > >>>> >> > and i really get the correct output file with thee right >>>> constellation. >>>> >> > >>>> >> > If I put a USRP source and USRP sink into graph, I don't receive >>>> >> > anything. >>>> >> > I hope anyone can help me. Thanks >>>> >> > >>>> >> > >>>> >> > _______________________________________________ >>>> >> > Discuss-gnuradio mailing list >>>> >> > [email protected] >>>> >> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>>> >> > >>>> >> >>>> >> >>>> >> >>>> >> -- >>>> >> --------------- >>>> >> Edmar Candeia Gurjão >>>> >> Universidade Federal de Campina Grande. >>>> >> 1 574 387 0195 >>>> >> http://ecandeia.dee.ufcg.edu.br >>>> > >>>> > >>>> > >>>> > _______________________________________________ >>>> > Discuss-gnuradio mailing list >>>> > [email protected] >>>> > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>>> > >>>> >>> >>> >>> _______________________________________________ >>> Discuss-gnuradio mailing list >>> [email protected] >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >>> >>> >> >
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
