Hi Luca,
I've been running into a similar problem with random spikes. Are you just
running uhd_fft.py? Have you tried using benchmark_rx.py/benchmark_tx.py?
-Jason
________________________________
From: Luca Pascale <[email protected]>
To: [email protected]
Sent: Thursday, May 3, 2012 8:18 AM
Subject: [Discuss-gnuradio] N200 strong spikes
Hi all,
I am using a N200+WBX with samplerate = 5e6, no input signal.
Independently on the tuning frequency I have two strong spikes about 1
MHz far (see attached picture on 500 MHz tuning frequency).
http://img189.imageshack.us/img189/7707/spikesf.jpg
I have a similar situation on 434 MHz band and also changing sample
rate to 10e6;
Is it a known problem or something is wrong in my setup ?
Luca
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
