Hi Martin, OK thanks. I have actually attached a piece of wire to a socket on the USRP and found that it is working. I sent my previous E mail too soon without checking properly!
Thanks for the information though. Frank > Date: Sat, 16 Feb 2013 15:56:39 +0100 > From: [email protected] > To: [email protected] > Subject: Re: [Discuss-gnuradio] setting hw number > > > > > > > Hi All, > > > > I'm unable to get simple_ra to recognize the USRP1. > > I have carried out the check below but do not know how to set the 'hw > > number' in 'simple_ra' > > > > Hope someone is able to help. > > > > Many thanks, > > > > Frank > > ------------------------------------------------------- > > alpha@alpha:~$ cat /proc/asound/cards > > 0 [Intel ]: HDA-Intel - HDA Intel > > HDA Intel at 0xfdff8000 irq 44 > > alpha@alpha:~$ > > > > ------------------------------------------------------ > > > > alpha@alpha:~$ aplay --list-devices > > **** List of PLAYBACK Hardware Devices **** > > card 0: Intel [HDA Intel], device 0: VT2020 Analog [VT2020 Analog] > > Subdevices: 1/1 > > Subdevice #0: subdevice #0 > > card 0: Intel [HDA Intel], device 2: VT2020 HP [VT2020 HP] > > Subdevices: 1/1 > > Subdevice #0: subdevice #0 > > > > Hi Frank, > > you are checking for Audio devices, the USRP is a regular USB device, not > an audio device. You can see information about your USRP hardware with > uhd_find_devices, given you use the UHD to interface your USRP. > > Try to find out if simple_ra also works with other devices than sound cards. > > Martin > > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
