I'm only trying to test my installation because I'm trying to learn to
use it and nothing works, so I needed to figure out if it's me doing
something wrong or something's broken. I think it's broken.
Here are fir_filter and multiply_conjugate I think as attachments.
Multiply_conjugate segfaults. Running the full set of tests still
hangs after this:
16/73 Test #16: qa_filter_delay_fc ............... Passed 0.86 sec
test 17
Start 17: qa_hier_block2
17: Test command: /bin/sh
"/usr/src/misc/gnuradio/gnuradio-3.6.3/build/gnuradio-core/src/python/gnuradio/gr/qa_hier_block2_test.sh"
17: Test timeout computed to be: 9.99988e+06
Alan
>
> The volk failures look like mostly just rounding and/or scaling
> issues. I wonder if that's what's affecting your other QA failures.
> Can you send the verbose output of a couple of these tests, like the
> fir_filter and multiply_conjugate?
>
> Tom
>
--
Credit is the root of all evil. - AB1JX
UpdateCTestConfiguration from
:/usr/src/misc/gnuradio/gnuradio-3.6.3/build/gnuradio-core/src/python/gnuradio/gr/DartConfiguration.tcl
UpdateCTestConfiguration from
:/usr/src/misc/gnuradio/gnuradio-3.6.3/build/gnuradio-core/src/python/gnuradio/gr/DartConfiguration.tcl
Test project
/usr/src/misc/gnuradio/gnuradio-3.6.3/build/gnuradio-core/src/python/gnuradio/gr
Constructing a list of tests
Done constructing a list of tests
Checking test dependency graph...
Checking test dependency graph end
test 37
Start 37: qa_interp_fir_filter
37: Test command: /bin/sh
"/usr/src/misc/gnuradio/gnuradio-3.6.3/build/gnuradio-core/src/python/gnuradio/gr/qa_interp_fir_filter_test.sh"
37: Test timeout computed to be: 9.99988e+06
37: >>> gr_fir_fff: using SSE
37: .
37: ----------------------------------------------------------------------
37: Ran 1 test in 0.029s
37:
37: OK
1/1 Test #37: qa_interp_fir_filter ............. Passed 0.59 sec
The following tests passed:
qa_interp_fir_filter
100% tests passed, 0 tests failed out of 1
Total Test time (real) = 0.61 sec
UpdateCTestConfiguration from
:/usr/src/misc/gnuradio/gnuradio-3.6.3/build/gnuradio-core/src/python/gnuradio/gr/DartConfiguration.tcl
UpdateCTestConfiguration from
:/usr/src/misc/gnuradio/gnuradio-3.6.3/build/gnuradio-core/src/python/gnuradio/gr/DartConfiguration.tcl
Test project
/usr/src/misc/gnuradio/gnuradio-3.6.3/build/gnuradio-core/src/python/gnuradio/gr
Constructing a list of tests
Done constructing a list of tests
Checking test dependency graph...
Checking test dependency graph end
test 44
Start 44: qa_multiply_conjugate
44: Test command: /bin/sh
"/usr/src/misc/gnuradio/gnuradio-3.6.3/build/gnuradio-core/src/python/gnuradio/gr/qa_multiply_conjugate_test.sh"
44: Test timeout computed to be: 9.99988e+06
44: Segmentation fault
1/1 Test #44: qa_multiply_conjugate ............***Failed 0.52 sec
0% tests passed, 1 tests failed out of 1
Total Test time (real) = 0.53 sec
The following tests FAILED:
44 - qa_multiply_conjugate (Failed)
Errors while running CTest
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
