Yes, please attach it to your ticket.

Am 07.08.2013 14:28, schrieb Anton Komarov:
Marcus, am i supposed to share e.g. 10 seconds of captured spectrum so you can play with it on your side?


On Wed, Aug 7, 2013 at 4:18 PM, Marcus Müller <mar...@hostalia.de <mailto:mar...@hostalia.de>> wrote:

    Hi Anton,
    it is really hard to capture apco25 signals in Germany.
    Could you really open a ticket, attach a few captured samples
    saved using a file sink,
    and the 3.6 and 3.7 flowgraphs; or provide some kind of test case
    with GNU Radio Signal sources
    that simulate a signal. Be sure to attach screenshots of your
    waterfall plots.
    It is really hard to guess what goes  wrong otherwise.

    Greetings,
    Marcus

    Am 07.08.2013 13:56, schrieb Anton Komarov:
    Ok, i've attached very simple grc chart
    with slider you can change the frequency, two waterfalls shows
    spectrums before and after xlating.
    So i had test it in apco25 env and took apco signals as a
    reference. So when i saw signal e.g. at 451.378 MHz and tuned to
    it i saw no signal after xlating nevertheless it was the same
    time on waterfall before xlating.

    You can test this chart with you radio environment.

    Then i testing the same logic with gr 3.6 (code is not compatible
    i have to redraw it..) and here it is! xlating worked like a charm.


    On Wed, Aug 7, 2013 at 1:48 PM, Martin Braun (CEL)
    <martin.br...@kit.edu <mailto:martin.br...@kit.edu>> wrote:

        On Wed, Aug 07, 2013 at 01:00:32PM +0400, Anton Komarov wrote:
        > Hi, made an attempt to test my python scripts with new
        3.7.0 of GR
        >
        > and what i am seeing xlate fir filter is broken
        >
        >
        > previously xlate worked perfect with 3.6 version
        >
        >
        > tested with waterfalls and i see wrong xlating
        >
        > i think developers should pay attention to this issue

        Hi Anton,

        can you please elaborate on this bug. Ideally, could you post
        an issue
        on our tracker:
        http://gnuradio.org/redmine/projects/gnuradio/issues

        Specify what you configured, what the expected outcome was
        and what
        happened instead.

        Thanks,
        MB

        --
        Karlsruhe Institute of Technology (KIT)
        Communications Engineering Lab (CEL)

        Dipl.-Ing. Martin Braun
        Research Associate

        Kaiserstraße 12
        Building 05.01
        76131 Karlsruhe

        Phone: +49 721 608-43790
        Fax: +49 721 608-46071
        www.cel.kit.edu <http://www.cel.kit.edu>

        KIT -- University of the State of Baden-Württemberg and
        National Laboratory of the Helmholtz Association

        _______________________________________________
        Discuss-gnuradio mailing list
        Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org>
        https://lists.gnu.org/mailman/listinfo/discuss-gnuradio




    _______________________________________________
    Discuss-gnuradio mailing list
    Discuss-gnuradio@gnu.org  <mailto:Discuss-gnuradio@gnu.org>
    https://lists.gnu.org/mailman/listinfo/discuss-gnuradio


    _______________________________________________
    Discuss-gnuradio mailing list
    Discuss-gnuradio@gnu.org <mailto:Discuss-gnuradio@gnu.org>
    https://lists.gnu.org/mailman/listinfo/discuss-gnuradio



_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Reply via email to