There is also no --args option. Here are options:
Options:
-h, --help show this help message and exit
-a ADDRESS, --address=ADDRESS
select address of the device
[default=addr=192.168.10.2]
-f FREQ, --freq=FREQ set frequency to FREQ
-g GAIN, --gain=GAIN set gain in dB [default=0]
-R SAMP_RATE, --samp-rate=SAMP_RATE
set USRP sample rate [default=200000]
-t THRESHOLD, --threshold=THRESHOLD
Set the detection power threshold (dBm) [default=-60
-T, --trigger Use internal trigger instead of detector
[default=False]
On Tue, Aug 27, 2013 at 5:52 PM, Marcus D. Leech <[email protected]> wrote:
> On 08/27/2013 11:50 AM, Nemanja Savic wrote:
>
> There is no option --type error comes out :(
>
>
> On Tue, Aug 27, 2013 at 5:14 PM, Marcus D. Leech <[email protected]>wrote:
>
>>
>> Hi guys,
>>
>> I am facing problem when starting uhd_burst_detector.py. It won't start
>> because address is wrong, but since I am using usrp1, I don't know what to
>> put.
>>
>> Thanks,
>>
>> --
>> Nemanja Savić
>>
>> Well, I'm not familiar with that particular program, but if it has an
> --args option, then:
>
> --args "type=usrp1"
>
> Should work
>
>
>
>
--
Nemanja Savić
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
