Hi Bastian, I have two USRP N200 devices and trying to test on them. However it seems like not working. Here is the code that I run:
~/gr-ieee802-11/examples$ sudo ./ofdm_tx.py linux; GNU C++ version 4.7.3; Boost_105300; UHD_003.006.000-0-g7788c692 (python:19831): IBUS-WARNING **: The owner of /home/nasimi/.config/ibus/bus is not root! -- Opening a USRP2/N-Series device... -- Current recv frame size: 1472 bytes -- Current send frame size: 1472 bytes Using Volk machine: ssse3_64 OFDM MAPPER: encoding: 0 The A led is off all the time except for the beginning. in the second device I run ~/gr-ieee802-11/examples$ sudo ./ofdm_rx.py But there is nothing noticable. Am I doing all correctly? Пятница, 22 ноября 2013, 20:19 +01:00 от Bastian Bloessl <[email protected]>: > >On 22 Nov 2013, at 20:02, nesimi eldarov < [email protected] > wrote: >> >> Do you think it would be possible to use two USRPs, one for the tranmitter >> and the second for the receiver? >> > >Yes, but at least you have to change MAC and IP address in the start script. >Maybe enable promisc mode of the TAP device or change the WiFi MAC. I’m not >100% sure if this is required, but have no USRP around to test. > >Bastian -- NE
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
