Yes , I tried it again & it works :) Thanks Tom , Volker & Nathan . I ran gnuradio in terminal after installing & I see there is no problem in it sara@ubuntu:~/gnuradio$ gnuradio-companion Warning: Block key "blocks_ctrlport_monitor_performance" not found when loading category tree. Warning: Block key "blocks_ctrlport_monitor_performance" not found when loading category tree. linux; GNU C++ version 4.6.3; Boost_104800; UHD_003.007.000-53-g6962543f <<< Welcome to GNU Radio Companion 3.7.3 >>> Showing: ""
BUT when installing it , after 3 hours of installation , I got an output which shows that GNURADIO_CORE & GRUEL LIBRARIES are not found ! is there a problem , or these libraries are not important ? Do I have to uninstall & install again?! also it is saying : "You will not be able to access your USRP1 device until you do this.... " .. I will use B100 & B200 , is there any problem ? Any problem will occur when using my usrps?! also it is saying : " You should probably set your PYTHONPATH to: /usr/local/lib/python2.7/dist-packages Using: export PYTHONPATH=/usr/local/lib/python2.7/dist-packages in your .bashrc or equivalent file prior to attempting to run any Gnu Radio applications or Gnu Radio Companion. " what is the importance to do that ,as I ran gnuradio now ? I found a .bashrc file in home directory , is this the meant file? I will copy paste "export PYTHONPATH=/usr/local/lib/python2.7/dist-packages" to the end of file , tell me if this is not right. Thanks & Here is the output in terminal during installation: Starting function extras at: Fri Mar 28 18:20:28 EET 2014 mv: cannot stat `gr-baz': No such file or directory Doing GIT checkout for extra module gr-baz Cloning into 'gr-baz'... remote: Reusing existing pack: 1101, done. remote: Total 1101 (delta 0), reused 0 (delta 0) Receiving objects: 100% (1101/1101), 798.65 KiB | 51 KiB/s, done. Resolving deltas: 100% (579/579), done. Building extra module gr-baz -- The CXX compiler identification is GNU -- The C compiler identification is GNU -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working C compiler: /usr/bin/gcc -- Check for working C compiler: /usr/bin/gcc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Build type not specified: defaulting to release. -- Boost version: 1.48.0 -- Found the following Boost libraries: -- system -- thread -- checking for module 'gruel' -- package 'gruel' not found -- Could NOT find GRUEL (missing: GRUEL_LIBRARIES GRUEL_INCLUDE_DIRS) -- checking for module 'gnuradio-core' -- package 'gnuradio-core' not found -- Could NOT find GNURADIO_CORE (missing: GNURADIO_CORE_LIBRARIES GNURADIO_CORE_INCLUDE_DIRS) CMake Error at CMakeLists.txt:135 (message): Gruel required to compile baz -- Configuring incomplete, errors occurred! make: *** No targets specified and no makefile found. Stop. make: *** No rule to make target `install'. Stop. mv: cannot stat `grextras': No such file or directory Doing GIT checkout for extra module grextras Cloning into 'grextras'... remote: Reusing existing pack: 4066, done. remote: Total 4066 (delta 0), reused 0 (delta 0) Receiving objects: 100% (4066/4066), 4.50 MiB | 55 KiB/s, done. Resolving deltas: 100% (1996/1996), done. Building extra module grextras -- The CXX compiler identification is GNU -- The C compiler identification is GNU -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working C compiler: /usr/bin/gcc -- Check for working C compiler: /usr/bin/gcc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Build type not specified: defaulting to release. -- Boost version: 1.48.0 -- checking for module 'volk' -- found volk, version 0.1 -- Found VOLK: /usr/local/lib/libvolk.so -- checking for module 'gruel' -- package 'gruel' not found -- Could NOT find GRUEL (missing: GRUEL_LIBRARIES GRUEL_INCLUDE_DIRS) -- checking for module 'gnuradio-core' -- package 'gnuradio-core' not found -- Could NOT find GNURADIO_CORE (missing: GNURADIO_CORE_LIBRARIES GNURADIO_CORE_INCLUDE_DIRS) CMake Error at CMakeLists.txt:112 (message): Gruel required to compile extras -- Configuring incomplete, errors occurred! make: *** No targets specified and no makefile found. Stop. make: *** No rule to make target `install'. Stop. Done function extras at: Fri Mar 28 18:22:31 EET 2014 Starting function mod_groups at: Fri Mar 28 18:22:31 EET 2014 ******************************************************************************** This script has just modified /etc/group to place your userid '('$USER')' into group 'usrp' In order for this change to take effect, you will need to log-out and log back in again. You will not be able to access your USRP1 device until you do this. If you wish to allow others on your system to use the USRP1 device, you will need to use: sudo usermod -a -G usrp userid For each userid you wish to allow access to the usrp ******************************************************************************** Further Done function mod_groups at: Fri Mar 28 18:22:33 EET 2014 Starting function mod_udev at: Fri Mar 28 18:22:33 EET 2014 Done function mod_udev at: Fri Mar 28 18:22:33 EET 2014 Starting function mod_sysctl at: Fri Mar 28 18:22:33 EET 2014 Applying updates to /etc/sysctl.conf Group 'usrp' now has real-time scheduling privileges You will need to log-out and back in again for this to take effect Done function mod_sysctl at: Fri Mar 28 18:22:33 EET 2014 Starting function pythonpath at: Fri Mar 28 18:22:33 EET 2014 ************************************************************ You should probably set your PYTHONPATH to: /usr/local/lib/python2.7/dist-packages Using: export PYTHONPATH=/usr/local/lib/python2.7/dist-packages in your .bashrc or equivalent file prior to attempting to run any Gnu Radio applications or Gnu Radio Companion. ************************************************************* Done function pythonpath at: Fri Mar 28 18:22:33 EET 2014 Done all functions at: Fri Mar 28 18:22:33 EET 2014 All Done Send success/fail info to sbrac.org?Y Thanks 2014-03-27 22:38 GMT+02:00 West, Nathan <n...@ostatemail.okstate.edu>: > On Thu, Mar 27, 2014 at 1:25 PM, Sara Chérif <saracheri...@gmail.com> > wrote: > > I tried this command but I got this output : > > sara@ubuntu:~/gnuradio$ git clone --progress > > https://github.com/gnuradio/gnuradio.git. > > Cloning into 'gnuradio.git.'... > > fatal: https://github.com/gnuradio/gnuradio.git./info/refs not found: > did > > you run git update-server-info on the server? > > > I just tried this and it works. It looks like the URI you were trying > had a period after .git, which would cause it to not work. Make sure > the URI doesn't have a period at the end exactly like this: git clone > --progress https://github.com/gnuradio/gnuradio.git > > > > I searched for the problem , I found in this link that i have to change > in > > ./git/config > > > http://stackoverflow.com/questions/9343189/did-you-run-git-update-server-info-error-on-a-github-repository > > but I didn't find this file ,, where can i find it (sorry i am new to > Ubuntu > > ) > > > > Then I found in the file named " build-gnuradio " this line > > git clone --progress http://git.gnuradio.org/git/gnuradio.git >>$LOGDEV > > 2>&1 > > and i changed it to: > > git clone --progress https://github.com/gnuradio/gnuradio.git >>$LOGDEV > > 2>&1 > > as you said > > > > But I have the same output!! > > > > Fetching Gnu Radio via GIT...Cloning into 'gnuradio'... > > error: Unable to get pack file > > > http://gnuradio.org/git/gnuradio.git/objects/pack/pack-4efcc5d853d522a5d355d67387c7f37121663227.pack > > transfer closed with 17230768 bytes remaining to read > > > > error: Unable to find 6d7dd3f7609d9ec26acefdf040be0e8bb77a222c under > > http://gnuradio.org/git/gnuradio.git > > Cannot obtain needed object 6d7dd3f7609d9ec26acefdf040be0e8bb77a222c > > while processing commit 85ae8fc1e6b7397eb6dc774e2e4eaf8049265b13. > > error: Fetch failed. > > Could not find gnuradio/gnuradio-{core,runtime} after GIT checkout > > GIT checkout of Gnu Radio failed! > > Send success/fail info to sbrac.org?Y > > I didn't follow what you did there, but it doesn't sound helpful. >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio