On 07/15/2014 01:21 PM, Ward, Marcus D. wrote:
Ok so now I went to try out my architecture this time with a TCP source and
sink. I have pictures included where the sending side is (TCPrecievestation)
and the receiving side is (TCPreceivedisplaystation).
On the (TCPreceievestation), the last three lines in the bottom window is as
follows:
RuntimeError: LookupError: KeyError: No devices found for -------->
Device Address:
Addr: (My USRP's IP address)
On the (TCPreceievedisplaystation), all I am getting is this:
using volk machine: avx_64_mmx_orc
To add, I have scopes for both the sending and receiving end, but as I run
them, the plots do not show.
Is there something that I could be missing since I am dealing with TCP and not
UDP?
One thing I noticed immediately is that you have the sample rate set to
32k, which is not a valid sample rate for ANY USRP hardware.
On the machine that has the USRP connected (presumable this is a N2xx
or USRP2?), what does:
ping 192.168.10.2
return?
what does uhd_usrp_probe --args "addr=192.168.10.2"
Return?
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
