Hi, I don’t have a E100 so I don’t know if it is fast enough, but shouldn’t it be easy to just try and find out?
Best, Bastian On 06 Aug 2014, at 17:45, Zongyi LIU <[email protected]> wrote: > > > ---------- Forwarded message ---------- > From: Zongyi LIU <[email protected]> > Date: 2014-08-06 17:30 GMT+02:00 > Subject: Re: [Discuss-gnuradio] Install UCLA-gr-802.15.4 into E100 has error > To: Bastian Bloessl <[email protected]> > > > Hi Bastian, > > I have read your paper "A GNURadio-based IEEE 802.15.4 Testbed". It's really > an excellent job. > Your testbed implement from PHY layer up to network layer and run Contiki > system. But, you implement them on N210 with a high performance. > > So, I don't know whether it's possible to implement your code on E100? As you > know, E100 use an embedded processor ARM Cortex-A8 with limited computational > and process ability, it runs special Angstrom linux system. > I got some information from this paper "IEEE 802.15.4 Implementation on an > Embedded Device", it mentions that they can't used UCLA-802.15.4 code to > receive packet. The embedded processor is not fast enough to demodulate data. > Finally, he redesign FPGA to pre-process some data before sending them to > processor and receive package barely.. > So, Hope for your suggestion and thank you again! > > Best > Zongyi > > > 2014-08-06 9:59 GMT+02:00 Bastian Bloessl <[email protected]>: > > You could give this a try > > https://github.com/bastibl/gr-ieee802-15-4 > > Best, > Bastian > > > On 05 Aug 2014, at 18:07, Tom Rondeau <[email protected]> wrote: > > > On Tue, Aug 5, 2014 at 11:51 AM, Zongyi LIU <[email protected]> wrote: > > Hello everyone: > > > > Recently, I want to install UCLA-gr-ieee802.15.4 module into my USRP E100. > > > > When I was configuring it, UCLA-gr-ieee802.15.4 had some error. I modify > > the PATH as follow: > > //"C_INCLUDE_PATH=/usr/include/python2.6 > > //export C_INCLUDE_PATH" > > Beside, I modify the Makefile.common as follow to fix it: > > //"# includes > > //grincludedir = $(includedir)/gnuradio -I/usr/include/gnuradio > > //# swig includes > > //swigincludedir = $(grincludedir)/swig -I/usr/include/gnuradio/swig" > > > > But, after "./configure". there is a fatal error in > > "make"----:"ucla.cc:149:20: fatal error: Python.h: No such file or > > directory" > > // > > root@usrp-e1xx:~/UCLA-gr-ieee802-15-4/gr-ieee802-15-4# make > > make all-recursive > > make[1]: Entering directory > > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4' > > Making all in config > > make[2]: Entering directory > > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/config' > > make[2]: Nothing to be done for `all'. > > make[2]: Leaving directory > > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/config' > > Making all in src > > make[2]: Entering directory > > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src' > > Making all in lib > > make[3]: Entering directory > > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src/lib' > > make all-am > > make[4]: Entering directory > > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src/lib' > > /bin/bash ../../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. > > -I../.. -I/usr/include/gnuradio -I/usr/include/python2.6 -g -O2 -Wall > > -Woverloaded-virtual -pthread -MT ucla.lo -MD -MP -MF .deps/ucla.Tpo -c -o > > ucla.lo ucla.cc > > libtool: compile: g++ -DHAVE_CONFIG_H -I. -I../.. -I/usr/include/gnuradio > > "-I/usr/include/python2.6" -g -O2 -Wall -Woverloaded-virtual -pthread -MT > > ucla.lo -MD -MP -MF .deps/ucla.Tpo -c ucla.cc -fPIC -DPIC -o .libs/ucla.o > > ucla.cc:149:20: fatal error: Python.h: No such file or directory > > compilation terminated. > > make[4]: *** [ucla.lo] Error 1 > > make[4]: Leaving directory > > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src/lib' > > make[3]: *** [all] Error 2 > > make[3]: Leaving directory > > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src/lib' > > make[2]: *** [all-recursive] Error 1 > > make[2]: Leaving directory > > `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4/src' > > make[1]: *** [all-recursive] Error 1 > > make[1]: Leaving directory `/home/root/UCLA-gr-ieee802-15-4/gr-ieee802-15-4' > > make: *** [all] Error 2 > > // > > I searched on google, the solution is install python-dev, but E100 has > > python2.6 in facroty default. > > So, it really confuse me a lot. > > Thank you in advance! > > > > -- > > Zongyi LIU > > Doctorant > > Institut de Recherche en Informatique de Toulouse (IRIT) > > Université Paul Sabatier, 118 Route de Narbonne, F-31062 TOULOUSE CEDEX 9 > > Email : [email protected] > > > > Just a word of caution: this is a very old project and not likely to work > > with the latest GNU Radio code. > > > > You're problem is indeed that you don't have the development package for > > Python installed. You have the normal, runtime package, but this doesn't > > include the development header files. > > > > Tom > > > > _______________________________________________ > > Discuss-gnuradio mailing list > > [email protected] > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > -- > Dipl.-Inform. Bastian Bloessl > Distributed Embedded Systems Group > University of Paderborn, Germany > http://www.ccs-labs.org/~bloessl/ > > > > > -- > Zongyi LIU > Doctorant > Institut de Recherche en Informatique de Toulouse (IRIT) > Université Paul Sabatier, 118 Route de Narbonne, F-31062 TOULOUSE CEDEX 9 > Email : [email protected] > > > > -- > Zongyi LIU > Doctorant > Institut de Recherche en Informatique de Toulouse (IRIT) > Université Paul Sabatier, 118 Route de Narbonne, F-31062 TOULOUSE CEDEX 9 > Email : [email protected] > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio -- Dipl.-Inform. Bastian Bloessl Distributed Embedded Systems Group University of Paderborn, Germany http://www.ccs-labs.org/~bloessl/ _______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
