Hi, I installed newer version of OpenBTS 4.
OpenBTS has been installed successfully. But I got error after 2-3 seconds running of Open BTS as follows: ./OpenBTS Starting the system... ALERT 5921:5921 2014-08-20T13:31:24.0 TRXManager.cpp:486:setTSC: SETTSC failed with status 1 1408521684.025657 3073992448: system ready 1408521684.025760 3073992448: use the OpenBTSCLI utility to access CLI OpenBTS> EMERG 5921:5928 2014-08-20T13:31:41.4 TRXManager.cpp:101:clockHandler: TRX clock interface timed out, assuming TRX is dead. Aborted (core dumped) It may be happened due to device USRP1, which is not found in uhd_find_devices:- uhd_find_devices linux; GNU C++ version 4.6.3; Boost_104601; UHD_003.007.001-20-unstable -- Loading firmware image: /usr/share/uhd/images/usrp1_fw.ihx... done UHD Error: Device discovery error: Connection refused -------------------------------------------------- -- UHD Device 0 -------------------------------------------------- Device Address: type: usrp1 name: serial: 00000000 and following command works as follows: uhd_usrp_probe --args="type=usrp1" linux; GNU C++ version 4.6.3; Boost_104601; UHD_003.007.001-20-unstable -- Loading firmware image: /usr/share/uhd/images/usrp1_fw.ihx... done -- Opening a USRP1 device... -- Loading FPGA image: /usr/share/uhd/images/usrp1_fpga.rbf... done -- Using FPGA clock rate of 64.000000MHz... UHD Warning: Unknown transceiver board ID combination. Is your daughter-board mounted properly? RX dboard ID: Unknown (0xffff) TX dboard ID: RFX900 (0x0029) _____________________________________________________ / | Device: USRP1 Device Please let me know solution for same. Thanks a lot. Regards, Ajay
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
