The N210 neither knows, nor cares, *what* is going on on your CPU, nor whether there's enough CPU for it to send samples to you. To use a physical-world analogy, Niagara Falls neither knows, nor cares, whether the bucket you're holding at the bottom of it to "capture" it is big enough--it'll just keep on being Niagara Falls regardless.
Also, you'd quoted 45% CPU consumption, which is *total* consumption, which means that at least *ONE* CPU was probably totally-pegged. Individual processes don't automatically occupy multiple CPUs. That's not how multi-core systems work. The kernel schedules threads across multiple CPUs the best it can. A single process thread can still "starve" for CPU, even if other threads, on other CPUs are "happy". In this case the thread that was doing your FFT display logic was probably running into CPU limitations--the wxGUI FFT sink (which is what is used by uhd_fft) isn't the most efficient. However, on a modern i7 CPU, it should still be able to support 15 updates/second, so I'm guessing that your CPU performance profile is set to something like "power saving" or similar. You'll have to research how to adjust that on Ubuntu under Unity, since I don't know myself. On 2014-12-18 15:24, Richard Bell wrote: > The key setting that mleech pointed out was setting the fft-rate lower, > uhd-fft --fft-rate 5. > > I suppose the N210 can't handle the default setting, since my laptop (corei7, > 16 gig ram) doesn't seem to be the bottleneck going by cpu usage and mem > usage. > > On Thu, Dec 18, 2014 at 11:57 AM, Richard Bell <[email protected]> > wrote: > > When the window greys out, my CPU is only at 45% usage. > > When I run uhd_usrp_probe I get all the device info you would expect to get. > The command works as it should. > > Rich > > On Thu, Dec 18, 2014 at 11:48 AM, Ron Economos <[email protected]> wrote: > When a window greys out, it typically means you're using too much CPU. > > Ron > > On 12/18/2014 11:45 AM, Richard Bell wrote: > > I created ~/.gnuradio/config.conf with the following lines in it > > [wxgui] > style=nongl > > This has not fixed the window not responding issue. Any other ideas? > > Rich > > On Thu, Dec 18, 2014 at 11:33 AM, Richard Bell <[email protected]> > wrote: > I don't know if this matters, but I used the pybombs install method. I am > looking for the .conf file, but the only thing in my .gnuradio directory is > > ~/.gnuradio/prefs/vmcrcbuf_default_factory > > On Thu, Dec 18, 2014 at 11:29 AM, <[email protected]> wrote: > > See "to enable OpenGL sinks" here: > > http://sdrblog.wordpress.com/gnuradio-installation/ [2] > > You'll use "style=nongl", instead of "style=auto" or "style=gl" > > On 2014-12-18 14:25, Richard Bell wrote: > > Yes I'm using Unity. I forgot to mention my hardware, which is an N210 with > WBX daughterboard. > > I'm not sure how to make the style change like you mentioned. > > On Thu, Dec 18, 2014 at 10:54 AM, Martin Braun <[email protected]> > wrote: > > On 12/18/2014 07:39 PM, Richard Bell wrote: >> I'm using Ubuntu 14.04, UHD_003.008.00-18-g864f84b5 and GNU Radio 3.7.6 >> >> Whenever I start uhd_fft from a command line, the window opens and >> starts to plot. After about a second, the window goes into not >> responding mode, where it greys out and you can't click anything. Does >> anyone know what could be causing this behaviour? Is it a local setting >> of mine? > > Are you using Ubuntu's unity? > > It might be a GL issue. Try if setting style = nongl will help. > > M > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio [1] > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio [1] _______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio [1] _______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio [1] _______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio [1] Links: ------ [1] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio [2] http://sdrblog.wordpress.com/gnuradio-installation/
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
