On Wed, Jul 1, 2015 at 6:22 AM, Nguyễn Văn Lý <[email protected]> wrote:
> I solved my problem by using the argument *bladerf=i* with *i* = 0,1,2,3 > > On Wed, Jul 1, 2015 at 5:14 PM, Nguyễn Văn Lý <[email protected]> > wrote: > >> Hi all, >> >> I want to use 4 bladeRF devices on a single laptop. This means I have to >> load the FPGA file to all of 4 bladeRF devices. >> However, currently I can only load the PFGA file to 2 devices. >> I am using the command: >> >> bladeRF-cli -l <path/to/FPGA/file> >> >> Does anyone know how to load the FPGA file to 4 bladeRF devices on a >> single laptop? Please help me with this! >> Thank you in advance. >> >> > Hi Van-Ly, You might want to consider the Nuand forums [1], for bladeRF questions that don't directly pertain to GNU Radio. As far as loading the FPGA, I would recommend you review the bladeRF wiki [2] with respect to having the host software automatically load FPGA when opening a device handle. Personally, I prefer this method over all others, and prefer to store bitstreams in ~/.config/Nuand/bladeRF/. The gr-osmosdr wiki page [3] also provides a list of supported device arguments. One of these allows you to specify an FPGA to load. Best regards, Jon [1] https://www.nuand.com/forums/ [2] https://github.com/Nuand/bladeRF/wiki/FPGA-Autoloading#host-software-based [3] http://sdr.osmocom.org/trac/wiki/GrOsmoSDR#bladeRFSourceSink
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
