Dear Tom,
Thanks for your advice.
Actually, I've got a trouble for days installing Thrift and enabling it
from GNU Radio.
This is just a simple wrap-up for readers who are not familiar with
compiling and building things.)
Installing thrift:
1. Get Thrift 0.9.2
0.9.2 release tag of git repository have some buggy stuff.
So get the stable release from https://thrift.apache.org/download
2. Extract it and build. Make sure that you have all of pre-requisites.
$ tar xf thrift-0.9.2.tar.bz2
$ cd thrift-0.9.2
$ ./configure
$ make
$ sudo make install
$ sudo ldconfig # just in case
3. Check python can import Thrift
$ python
>>> import thrift
3-1. If python can't, do the followings:
$ cd thrift-0.9.2/lib/py
$ sudo python setup.py install
Go back step 3. And check again.
4. Build GNU Radio.
$ cd gnuradio
$ mkdir build
$ cd build
$ cmake ..
$ make
$ sudo make isntall
4-1. One important thing is, I recommend you to delete everythink inside
build directory.
At least, I recommend you to remove CMakeCache.txt:
$ cd build
$ rm -rf ./
# or
$ rm CMakeCache.txt
This file can help executing cmake, but sometimes it makes cmake get
wrong variables.
I've spent days to figure out this. cmakek gives me a wrong thrift
binary path /usr/bin/thrift.
Actually, I have thrift under /usr/local/bin.
I think it's a quite unusual case since I have been messing around my PC.
If you have a system with some fresh installation and configuration, it
won't be a problem.
Regards,
Jeon.
2015-08-04 0:05 GMT+09:00 Tom Rondeau <[email protected]>:
> On Sat, Aug 1, 2015 at 1:41 AM, Volker Schroer <[email protected]> wrote:
>
>> The same error happens in the 3.7.8 release candidate.
>>
>> -- Volker
>>
>>
>>
>> I am trying to measure performance of my OOT module with performance
>> counter and control port.
>>
>> When I execute a command line `gr-perf-monitorx` or
>> `gr-ctrlport-monitor`, an error below occurred:
>>
>> File
>> "/usr/local/lib/python2.7/dist-packages/gnuradio/ctrlport/GrDataPlotter.py",
>> line 26, in <module>
>> from gnuradio.ctrlport import GNURadio
>> ImportError: cannot import name GNURadio
>>
>> Could anyone give me a hint for this?
>>
>> For detail information, I've installed GNU Radio with `build-gnuradio`
>> script. The last commit of cloned git repository in my PC is `d5cea6e4(
>> https://gnuradio.org/redmine/projects/gnuradio/repository/revisions/d5cea6e44e29db6b62fabe2b1e5ec16e91b41e68)`
>> in Jun 22 2015. I can't remember exactly, but I think this commit was used
>> to install the GNU Radio.
>>
>> Regards,
>> Jeon.
>>
>>
> This sounds as if Thrift wasn't found when running cmake. Our cmake
> scripts use thrift to compile our gnuradio.thrift file into C++ and Python
> code that is installed with GNU Radio.
>
> The output of cmake will tell you if it found Thrift or not. Look under
> the list of enabled components for:
>
> -- * gr-ctrlport
> -- * * thrift
>
> Tom
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> [email protected]
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
