[Note: The reason I'm posting this here is because I'm not sure whether
this is solely a UHD problem or perhaps because of some 'suboptimal'
communication between GNURadio & UHD, and I've seen some earlier posts on
this list resolving UHD-related issues.If this is off-topic and does not
belong here, I apologize!]
Dear all,
I've been working with GNURadio & UHD/USRP for quite some time now. All of
a sudden I started seeing the following messages when running my flowgraph,
on which I couldn't find any info:
UHD Warning:
No revision detected MB EEPROM must be reprogrammed!
At the time I was using UHD 3.9. Anyhow, a colleague told me that he also
used to have problems with too new versions of UHD, but that those
disappeared as he started to use UHD 003.008.005. So I erased all traces of
GNURadio & UHD and reinstalled from scratch using the build-gnuradio
script, now specifying that I want UHD version 003.008.005 installed.
Furthermore, I ran the usrp_x3xx_fpga_burner tool to rewrite the EEPROM of
the X300. Now, when I wish to run my GNURadio flowgraph, I get the
following return messages:
linux; GNU C++ version 4.8.4; Boost_105400; UHD_003.008.005-0-g7efbd15b
-- X300 initialization sequence...
-- Determining maximum frame size... 8000 bytes.
-- Setup basic communication...
-- Loading values from EEPROM...
-- Setup RF frontend clocking...
UHD Warning:
No revision detected MB EEPROM must be reprogrammed!
UHD Warning:
Defaulting to X300 RevD Clock Settings. This will result in non-optimal
lock times.
Traceback (most recent call last):
File "/home/matija/bin/phantom2_mod.py", line 270, in <module>
tb = phantom2_mod()
File "/home/matija/bin/phantom2_mod.py", line 92, in __init__
channels=range(1),
File "/usr/local/lib/python2.7/dist-packages/gnuradio/uhd/__init__.py",
line 122, in constructor_interceptor
return old_constructor(*args)
File "/usr/local/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py",
line 2282, in make
return _uhd_swig.usrp_sink_make(*args)
RuntimeError: RuntimeError: Unsupported board revision number:
18446744073709382690.
The maximum board revision number supported in this version is 6.
Please update your UHD version.
>>> Done (return code 1)
Did anyone else experience the same problems? Can I not use UHD 003.008.005
with the X300? I'm assuming that something weird happened during the
installation as the board revision number is so odd..
I'm using an USRP X300 with a UBX-160 daughterboard, connected over 10Gb
ethernet. Gnuradio version: 3.7.7.2. My system is 64bit Ubuntu 14.04.
Any help is greatly appreciated!
Kind regards,
Mat
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
