Hi Abs, there's no minimum Bit rate, but a minimum Sample rate, which for Gen2 devices such as the N2xx is Master Clock Rate / 512, ie. 100MHz/512 = 195312.5 Hz.
20kHz is significantly below that, so UHD will tell you that it actually set the sample rate to 195.3125 kHz when you try to set the sampling rate. Consequently, supplying only 20kS/s to the USRP will lead to a whole lot of underruns. Best regards, Marcus On 09/04/2015 05:47 AM, Abdeslam Bourkane wrote: > Hello, > > What is the minimum bit-rate of the N210 ? There is any formula to > define it ? > > The N210 has 16 bit samples (limited by the host-GigE) so up to 25MS/s. > > C. Freq = 846.8 MHz > Bandwidth = 1MHz > Channel Bandwidth = 100 Hz > Sample Rate (Fs) = 20KHz > > Is that correct : > BitRate = sample rate * 16bit * 2 ? > BitRate = 20KHz * 16 bit * 2 = 6.4 Mbps > > The speedometer shows 798 KB/s (6.384Mbps). > > Thanks in advance > > Abs > > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
