Hi Ekko,

as Michael said, if you need arbitrary lengths of data to be complete,
that would be at least one layer up the network layer model; you'll need
to ensure your data fits into packets perfectly.

Best regards,
Marcus

On 06.01.2016 19:26, Michael Berman wrote:
>
> Ekko,
>
>  
>
> It has been a while since I have dealt with this kind of issue with
> the digital coms, but I have run into this.  The problem I found was
> that there was not enough data in the file to feed the packetizer
> properly.  There are probably several work arounds for this, but the
> simplest would be to pad the data up to the exact amount the
> packetizer needs to generate the packets and send them along.  You can
> check if this is the case by varying the size of your file.  If you
> change the number of bytes in the file, you should see the amount left
> out varying; if you add bytes slowly you should see a breakover point
> near a multiple of the number of bits the packetizer needs that will
> create a small or no amount of data not transmitted.
>
>  
>
> Michael
>
>  
>
> *From:*[email protected]
> [mailto:[email protected]] *On
> Behalf Of *Ekko
> *Sent:* Wednesday, January 06, 2016 9:01 AM
> *To:* [email protected]
> *Subject:* [Discuss-gnuradio] how to send a complete file
>
>  
>
> hello
>
>  
>
> I'm using gnuradio to simulation the gmsk tx/rx with a file
>
> this is my grc
>
>  
>
> you can see ,i am using a file_sink and file_source,
>
> the file_source is set to not repeat,i want to send this file ony one
> time.
>
>  
>
> and my source file‘s size is 140KB
>
>  
>
> after i run this grc (i am sure the send is stop )
>
>  
>
> i check the dest file,the size of whitch is 139.3KB
>
>  
>
> then i compare two file
>
> just like
>
>
> ​
>
> we can see that some data is lost(exactly 22 lines),
>
> so i want to know how can i send a complete file, just i send
> 140KB,and recieved 140KB,
>
> then stop.
>
>  
>
>  
>
> thank you
>
>  
>
> -Ekko​
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> [email protected]
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Reply via email to