Hello Royce, It looks like there is GNU Radio support for the board you mention. https://wiki.analog.com/resources/tools-software/linux-software/gnuradio
Assuming the Source block runs you should have little problem connecting it to the gr-air-modes blocks. I'd recommend reaching out to the discuss-gnuradio mailing list (cc'd here) and asking if anyone has experience there. And of course if you have the boards then just give it a try with a basic fft block to see if you're receiving spectrum. Regards and good luck! Derek On Tue, Mar 29, 2016 at 12:33 AM, Royce Ramelb via USRP-users < [email protected]> wrote: > Hi all, > I am an undergrad student in my final year, currently working on my > project. We are required to reimplement a project and I chose the ADS-B > receiver. The code I use is Nick Foster's available in github < > https://github.com/bistromath/gr-air-modes.git>. Is there anyone that > also worked with the same code? > The problem is there is no ettus or osmocom platforms available in the lab > as of the moment. I am planning to implement it through ADI-FMCOMMS3-EBZ > board in ZedBoard instead. Is it possible/compatible? Are there someone who > worked with similar platform? > Also, may I ask how the ip:port option in the source parameter of modes_rx > works? > I hope you can find time to respond and help. > Thank you in advance > > _______________________________________________ > USRP-users mailing list > [email protected] > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com > >
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
