On 05/03/2016 04:25 PM, John Shields wrote:
Thanks Marcus,
I have moved the N200 over to another cable to
see if the situation improves but I think that the best solution is to
move the Ubuntu box into the shack rather than move house/shack closer :)
Lazy :) :)
Slainte,
John
On 03/05/16 19:12, [email protected] wrote:
The native BER of 1000BASE-T is better than 1.0e-11 or so.
Which means you'd expect a bad bit roughly every half-hour at 2msps
(64Mbit/sec), the bad-bit probabilities get worse as you make the
cable longer.
On 2016-05-03 12:59, John Shields wrote:
On 03/05/16 15:01, [email protected] wrote:
It's possible that we're dealing with a memory leak somewhere.
Could you watch the memory consumption of simple_ra over time?
Also, could you just run something like uhd_fft with the same
sample rate for long periods to see if it gets the same 'D' treatment?
On 2016-05-03 04:32, John Shields wrote:
Thanks Marcus,
Have put answers in-line.
Kind Regards,
John
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
Ok, Marcus, will do. Overnight (NZ time) I got 1 D with the Atheros.
I should have said that the N200 was in the shack and the Ubuntu
system in the house. I have several runs of Ethernet out to the
shack so will do some experimentation on the different connections.
Then I will move the Ubuntu system to the shack and see if
colocation helps. These investigations will take some days but will
let you know.
Kind Regards,
John
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
