I'm not sure how to respond to the list when I receive the daily archive of the email traffic. As such I just copied your response text and am responding to that.
Thank you Martin for your help. I used apt-get remove uhd and apt-get remove gnuradio. I also looked for anything with gnuradio and UHD in the Synaptic Package manager and removed anything I found. I also deleted my directory "pybombprefix1". Then I re-executed the command: pybombs prefix init pybombsprefix1 -a myprefix -R gnuradio-default Again it failed in exactly the same place as mentioned below. Thanks again for your help. Dave From: Martin Braun Subject: Re: [Discuss-gnuradio] Issues with Pybombs and Package Manager Install on Ubuntu 16.04 Date: Wed, 6 Jul 2016 13:33:48 -0700 User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.8.0 _____ Dave, let's stick to one issue at a time. Your compile is probably failing because you have the package manager version still installed. Make sure you've removed everything you installed via apt-get (or whatever you used), that includes all UHD and GNU Radio packages, and retry PyBOMBS. Once we get that working, let's tackle the other issues. M On 07/06/2016 12:23 PM, Dave wrote: > I am attempting to install gnuradio on a Ubuntu 16.04 machine. Using > pybombs I get about 85% of the way along and then I get the errors show > at the end of this post. After this attempt I used the package manager > to load gnuradio with limited success. I'm new to gnuradio and I'm > using an ETTUS B100 device. Everything about gnuradio and the usrp > seems to work just fine if I boot from the current gnuradio usb stick > image. As such I think both my PC and my usrp are functioning > properly. After loading gnuradio from the package manager an running a > simple usrp source and QT Gui Sink, I got an error indicating "No USD > devices found" I ran uhd_find_devices and got the error message listed > below with my subsequent actions. I could then run my simple usrp > sources and QT Gui Sink and get results however I cannot use a sample > rate higher than about 2M samples/sec. Again this flow graph works fine > when booted from the usb image all the way to 8M samples/sec. Also when > running the uhd_wbfm_receive example flow graph I don't get any audio > from the Audio Sink but again it works just fine from the gnuradio usb > stick image. As such I'm trying to solve three problems. 1) install > via pybombs to completion 2) using the package manger manager version of > the install figure out why I can't get 8M sample rate and 3) Audio sink > output. Note: Through a separate post on the USRP list, I am trying to > work usrp "device not found" issues with my windows 7 install as well. > > I appreciate any help you folks can provide. > > Thanks, Dave > > Error from uhd_find_devices: > > address@hidden:~$ uhd_find_devices > > linux; GNU C++ version 5.3.1 20151219; Boost_105800; > UHD_003.009.002-0-unknown > > UHD Warning: > > Could not locate B100 firmware. Please run: > > "/usr/lib/uhd/utils/uhd_images_downloader.py" > > No UHD Devices Found > > address@hidden:~$ /usr/lib/uhd/utils/uhd_images_downloader.py > > Images destination: /usr/share/uhd/images > > You do not have sufficient permissions to write to: /usr/share > > Are you root? > > address@hidden:~$ sudo /usr/lib/uhd/utils/uhd_images_downloader.py > > [sudo] password for dave: > > Images destination: /usr/share/uhd/images > > Downloading images from: > http://files.ettus.com/binaries/images/uhd-images_003.009.002-release.zip > > Downloading images to: /tmp/tmpozhdaY/uhd-images_003.009.002-release.zip > > 26296 kB / 26296 kB (100%) > > Images successfully installed to: /usr/share/uhd/images > > address@hidden:~$ uhd_find_devices > > linux; GNU C++ version 5.3.1 20151219; Boost_105800; > UHD_003.009.002-0-unknown > > -- Loading firmware image: /usr/share/uhd/images/usrp_b100_fw.ihx... done > > -------------------------------------------------- > > -- UHD Device 0 > > -------------------------------------------------- > > Device Address: > > type: b100 > > name: b100 > > serial: EBR12XEB1 > > > > > > Pybombs Failure Transcript below: > > [ 85%] Built target _uhd_swig_swig_tag > > [ 85%] Built target uhd_swig_gr_uhd_swig_5e3ce > > [ 85%] Building CXX object > gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o > > /home/dave/pybombsprefix1/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap .cxx: > In function 'PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*, > PyObject*, PyObject*)': > > /home/dave/pybombsprefix1/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap .cxx:27178:15: > error: 'class uhd::usrp::dboard_iface' has no member named 'set_gpio_debug' > > (arg1)->set_gpio_debug(arg2,arg3); > > ^ > > /home/dave/pybombsprefix1/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap .cxx: > In function 'PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*, > PyObject*, PyObject*)': > > /home/dave/pybombsprefix1/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap .cxx:28541:16: > error: 'class uhd::usrp::dboard_iface' has no member named 'set_gpio_debug' > > (*arg1)->set_gpio_debug(arg2,arg3); > > ^ > > /home/dave/pybombsprefix1/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap .cxx: > In function 'void init_uhd_swig()': > > /home/dave/pybombsprefix1/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap .cxx:47716:91: > error: 'ATR_REG_IDLE' is not a member of 'uhd::usrp::dboard_iface' > > SWIG_Python_SetConstant(d, > "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int >>(uhd::usrp::dboard_iface::ATR_REG_IDLE))); > > ^ > > /home/dave/pybombsprefix1/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap .cxx:47717:94: > error: 'ATR_REG_TX_ONLY' is not a member of 'uhd::usrp::dboard_iface' > > SWIG_Python_SetConstant(d, > "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int >>(uhd::usrp::dboard_iface::ATR_REG_TX_ONLY))); > > ^ > > /home/dave/pybombsprefix1/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap .cxx:47718:94: > error: 'ATR_REG_RX_ONLY' is not a member of 'uhd::usrp::dboard_iface' > > SWIG_Python_SetConstant(d, > "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int >>(uhd::usrp::dboard_iface::ATR_REG_RX_ONLY))); > > ^ > > /home/dave/pybombsprefix1/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap .cxx:47719:98: > error: 'ATR_REG_FULL_DUPLEX' is not a member of 'uhd::usrp::dboard_iface' > > SWIG_Python_SetConstant(d, > "dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast< int >>(uhd::usrp::dboard_iface::ATR_REG_FULL_DUPLEX))); > > ^ > > gr-uhd/swig/CMakeFiles/_uhd_swig.dir/build.make:68: recipe for target > 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o' failed > > make[2]: *** > [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o] Error 1 > > CMakeFiles/Makefile2:11706: recipe for target > 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all' failed > > make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error 2 > > Makefile:160: recipe for target 'all' failed > > make: *** [all] Error 2 > > PyBOMBS.Packager.source - ERROR - Build failed. See output above for > error messages. > > PyBOMBS.Packager.source - ERROR - Problem occurred while building > package gnuradio: > > Build failed. > > PyBOMBS.install_manager - ERROR - Error installing package gnuradio. > Aborting. > >
_______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
