On 09/19/2016 05:46 AM, pen tester wrote:
> Hi Ron,
> Thank you for that tx grc graph, it is super helpful!
> I am just trying to get a receive work now. I am using the 6_psk.grc
> from the tutorial folder in the github repo you were using .
> I have modified mine for using a hackrf on tx side and on rx side I
> modified to use the same sample rate and freq as your tx graph. I added
> a slider to help tune in to the freq, but I haven't had luck decoding
> yet - did you have a working rx graph you were using for testing?
> Thanks again! :-)
>  https://github.com/argilo/sdr-examples/tree/master/tutorial
psk31.grc is BPSK and 6_psk.grc is QPSK.
You should put both the transit and receive in the same file without the
osmocom source and sink - connect the transmit and receive with a link -
cut out the hardware.
Then debug the encoding and decoding.
Otherwise, it may be hard to figure out if the problem is
encoding/decoding or timing, frequency or phase issues with the hardware.
> Discuss-gnuradio mailing list
Discuss-gnuradio mailing list