Hello Ann,

This question might be best addressed in the [USRP-users] list, as it might
be device specific, and you are not explicitly stating if you are using
GNURadio for your application.

Before moving your post there, have the following questions in
consideration:

* Are you still seeing this problem or have you solved it already?

If you already solved it:
* Could you please share what was the reason behind the unwanted behaviour,
and how you overcame it?

If you are still seeing the issue?
* Could you please explain better what the problem really is? Are you
seeing Underruns (U)? are you seeing Overruns (O)? or are you having a
packet error calculation in your receiver?

The reason why it might be causing problems at higher sample rate might be
because your host machine is not keeping up with the generation of samples
for transmission and/or processing of received samples (in that case, U's
or O's would be shown in terminal). You have to check if it is really a
performance issue, being it either that your application is not optimized
enough, or that your host machine doesn't really have the computational
power to deal with the task. Either way, a better description of the
problem is required in order to dig into it.

Regards,
- Nicolas


On Thu, Jun 15, 2017 at 6:35 PM, Qurat-Ul-Ann Akbar <
[email protected]> wrote:

> Hi,
>
> I previously posted about the possibility of connecting USRPs with a
> loopback cable kit. I have connected the two USRPs with the loopback cable
> kit to eliminate the wireless channel and low SNR problem but I am still
> not receiving packets at higher sampling rates, anything above 5 MHz. It
> works till 4 MHz but with a high packet error rate. What could be the
> reason for this ?
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> [email protected]
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Reply via email to