At one time rational resampling meant that the interpolation and decimation were each integers so the rate change is the ratio of two integers and thus rational.
If one or more of your inputs is fractional I believe you need the arbitrary rate resampler. Bob On Aug 15, 2017 10:16 PM, "Cinaed Simson" <cinaed.sim...@gmail.com> wrote: > On 08/14/2017 07:14 AM, Jack White wrote: > > Hello, knowledgeable ones, > > > > I need to put together testbed satellite uplink using AX.25 encoding and > > GMSK modulation. The flowgraph source is an Ettus USRP X310 with a > > WBX-120 daughterboard. > > > > The flowgraph is a modification of one used with a USRP B210. That radio > > had handle different sample rates to the X310, so some level of > > resampling is required - in this case from the proposed 614.4ksps to > > 400ksps. > > > > I understand the premise of constructing the AX.25 packet, but I'm > > having real difficulty understand tagged streams and how the tagging and > > the PDU format is affecting my transmission.> > > > > > > > > > > The disabled low-pass filter and the enabled and encircled rational > > resampler are my additions. The AX.25 line coding hierarchical block is > > below. > > > > > > > > So, when I run the flowgraph and try to set a command from the > > groundstation, I get a huge load of buffer underrun errors in the GRC > > log: > > UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU > UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU > > UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU > UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU > UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU > > UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU > UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU > UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU > > UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU > UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU > UUUUUUUUUUUUUUUUUU > > > > If I try sending the command again, I get a tP error, followed by more > > underruns. > > > > In my head, it looks like the USRP is expecting a combined sample of a > > certain length, but it doesn't get it. The buffer is more than half > > full. Then the next packet comes in, of the same length, and you get one > > buffer filled with half of one packet and half of another. > > > > The USRP /is/ transmitting something, because I checked the transmitting > > antenn400k/614.4a on a spectrum analyser. > > > > Can anyone help me understand the flowgraph, especially the tagged > > streams and PDU input, and get this working? > > > > Cheers, > > I don't really understand what you're doing but I have a couple of drive > by comments. > > The produce of 2 rationals is always rational - and the quotient of two > rationals is always rational. > > I would replace the 2 serial rational resamplers with one, namely, > > (8/1)*(400000/614400)=(8/1)*400/614.4) = 5.208333333333333/1 > > or > > 15.625/3 > > That is, interpolate by 15.625 decimate by 3. > > Since the sampling rate of the sink is 400000 Hz, then the sampling rate > coming out of the GFSK Mod needs to be 76800 Hz. > > And the baud rate out of the GFSK Mod would then be 76800 Hz/8 sps = 9600. > > If reducing the 2 serial rational resamplers to one doesn't help, I > would poke the front side of GFSK Mod - add a throttle in front of the > GFSK and set it to 76800 Hz - see what happens- not recommend for > general use. > > And I would add a Message Debug to Tagged Stream Multiply Length Tag and > set the Length scalar to 1 - 512 times the packet_length seems high - > but then I don't know the packet_length either. > > -- CInaed > > > > > -- > > Jack White > > white.n.j...@googlemail.com <mailto:white.n.j...@googlemail.com> > > 07875 813 745 > > > > > > _______________________________________________ > > Discuss-gnuradio mailing list > > Discuss-gnuradio@gnu.org > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
