Many thanks for your help Ron. I did a git checkout of cf954948
That resolved the rtl-sdr compiler error but introduced a blade rf compile
error.
I then re-did the cmake with -DENABLE_BLADERF=OFF and
got a clean make and clean make install.
However now at runtime I get the error:
traceback (most recent call last):
File "/home/tom/Desktop/GRC Flowgraphs/RTL2832 + DSTAR NOAA
etc/top_block.py", line 31, in <module>
import osmosdr
File "/usr/local/lib/python2.7/dist-packages/osmosdr/__init__.py", line
26, in <module>
from osmosdr_swig import *
File "/usr/local/lib/python2.7/dist-packages/osmosdr/osmosdr_swig.py",
line 28, in <module>
_osmosdr_swig = swig_import_helper()
File "/usr/local/lib/python2.7/dist-packages/osmosdr/osmosdr_swig.py",
line 24, in swig_import_helper
_mod = imp.load_module('_osmosdr_swig', fp, pathname, description)
ImportError: libboost_date_time.so.1.54.0: cannot open shared object file:
No such file or directory
I have boost 1.58 installed. Is boost 1.54 date_time something different
that needs to be in addition to boost 1.58 ?
If so, how would one install just a part of the boost library from a
previous version?
-- Tom
On Thu, Sep 21, 2017 at 12:05 PM, Ron Economos <w...@comcast.net> wrote:
> It's due to a mismatch between gr-osmosdr and the Ubuntu 16.04 rtlsdr
> library. There are a few different solutions to this problem.
>
> 1) If you're not using RTL-SDR dongles, then just purge the rtlsdr
> packages (librtlsdr-dev and librtlsdr0). Then rebuild gr-osmosdr and
> Osmocom RTLSDR should end up in the disabled components during the cmake
> phase.
>
> 2) Checkout a previous version of gr-osmosdr from before this change. git
> checkout cf954948 should work.
>
> 3) The correct solution is to build the rtl-sdr library from source and
> make sure gr-osmosdr links to that.
>
> https://github.com/osmocom/rtl-sdr
>
> Ron
>
>
> On 09/21/2017 11:40 AM, Tom McDermott wrote:
>
> Using Ubuntu 16.04, Have guradio 3.7.12git-231 master branch
> gnuradio runs fine.
>
> The old version of Osmocom no longer runs (after some years), so
> I started rebuild of gr-osmocom from scratch by cloning from
> git.osmocom.org/gr-osmosdr
> my current appliation is to get rtl-sdr running using Osmocom.
>
> Are there packages I must install to allow gr-osmocom to compile?
>
>
> Running CMAKE succeeds, with some missing packages:
>
>
> -- ######################################################
> -- # Gnuradio enabled components
> -- ######################################################
> -- * Python support
> -- * Osmocom IQ Imbalance Correction
> -- * FUNcube Dongle
> -- * IQ File Source & Sink
> -- * Osmocom RTLSDR
> -- * RTLSDR TCP Client
> -- * Ettus USRP Devices
> -- * HackRF & rad1o Badge
> -- * nuand bladeRF
> -- * RFSPACE Receivers
> -- * Red Pitaya SDR
> --
> -- ######################################################
> -- # Gnuradio disabled components
> -- ######################################################
> -- * sysmocom OsmoSDR
> -- * FUNcube Dongle Pro+
> -- * Osmocom MiriSDR
> -- * AIRSPY Receiver
> -- * SoapySDR support
> -- * FreeSRP support
> --
> -- Building for version: v0.1.4-98-gc653754d / 0.1.5git
> -- Using install prefix: /usr/local
> -- Configuring done
> -- Generating done
> -- Build files have been written to: /home/tom/gr-osmosdr/build
>
>
>
> MAKE then fails:
>
> tom@tom-XPS-8500:~/gr-osmosdr/build$ make
> Scanning dependencies of target gnuradio-osmosdr
> [ 2%] Building CXX object lib/CMakeFiles/gnuradio-
> osmosdr.dir/source_impl.cc.o
> [ 4%] Building CXX object lib/CMakeFiles/gnuradio-
> osmosdr.dir/sink_impl.cc.o
> [ 6%] Building CXX object lib/CMakeFiles/gnuradio-osmosdr.dir/ranges.cc.o
> [ 8%] Building CXX object lib/CMakeFiles/gnuradio-osmosdr.dir/device.cc.o
> [ 11%] Building CXX object lib/CMakeFiles/gnuradio-
> osmosdr.dir/time_spec.cc.o
> [ 13%] Building CXX object lib/CMakeFiles/gnuradio-
> osmosdr.dir/fcd/fcd_source_c.cc.o
> [ 15%] Building CXX object lib/CMakeFiles/gnuradio-
> osmosdr.dir/file/file_source_c.cc.o
> [ 17%] Building CXX object lib/CMakeFiles/gnuradio-
> osmosdr.dir/file/file_sink_c.cc.o
> [ 20%] Building CXX object lib/CMakeFiles/gnuradio-
> osmosdr.dir/rtl/rtl_source_c.cc.o
> /home/tom/gr-osmosdr/lib/rtl/rtl_source_c.cc: In constructor
> ‘rtl_source_c::rtl_source_c(const string&)’:
> /home/tom/gr-osmosdr/lib/rtl/rtl_source_c.cc:224:43: error:
> ‘rtlsdr_set_bias_tee’ was not declared in this scope
> ret = rtlsdr_set_bias_tee(_dev, bias_tee);
> ^
> lib/CMakeFiles/gnuradio-osmosdr.dir/build.make:254: recipe for target
> 'lib/CMakeFiles/gnuradio-osmosdr.dir/rtl/rtl_source_c.cc.o' failed
> make[2]: *** [lib/CMakeFiles/gnuradio-osmosdr.dir/rtl/rtl_source_c.cc.o]
> Error 1
> CMakeFiles/Makefile2:135: recipe for target
> 'lib/CMakeFiles/gnuradio-osmosdr.dir/all'
> failed
> make[1]: *** [lib/CMakeFiles/gnuradio-osmosdr.dir/all] Error 2
> Makefile:138: recipe for target 'all' failed
> make: *** [all] Error 2
> tom@tom-XPS-8500:~/gr-osmosdr/build$
>
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing
> listDiscuss-gnuradio@gnu.orghttps://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
