Hello Mehtap, On Mon, Nov 6, 2017 at 12:29 PM, mehtap özkan <kurtulmeh...@gmail.com> wrote: > 1. Which FPGA will be used Xilinx Artix 7 25T/35T/50T ?
It'll be 35T for the campaign because that's what we've been testing with. We've updated the pre-launch page to reflect this. Thank you for pointing this out. > 2. Will we be able to write and Upload our own Firmware? If yes what is the > method of programming (JTAG, USB3 etc..)? Yes, for sure! You can program it with our USB3 adaptor or with a JTAG cable and our PCIe adaptor. If you're good in soldering you can even solder JTAG directly to the XTRX - that's how we programmed our first samples. > 3. What is the Utilization %, will customized code fit into the FPGA? It's about 30% utilized. We'll share a more detailed utilization report later because it's not uniform across different resources. E.g. BRAM is almost completely gone, while DSP is almost unused. > 4. Is 10 MHz reference input supproted? Yes. -- Regards, Alexander Chemeris. CTO/Founder, Fairwaves, Inc. https://fairwaves.co _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio