Hi Marcus, The issue is even I put the vector source toggling with 1 and 0s it transmit a signal. So I need something that will not transmit at all and switch between these 2 radio chains.
Thanks, Ayaz From: Marcus D. Leech<mailto:mle...@ripnet.com> Sent: Saturday, July 14, 2018 8:15 PM To: Ayaz Mahmud<mailto:ayazmah...@hotmail.com>; "Müller, Marcus (CEL)"<mailto:muel...@kit.edu>; discuss-gnuradio@gnu.org<mailto:discuss-gnuradio@gnu.org> Subject: Re: [Discuss-gnuradio] Enable/Disable TX ports in B210 in 2x2 setup On 07/14/2018 06:40 PM, Ayaz Mahmud wrote: Hi Muller / Marcus, I got the testing right now, but unfortunately it doesn’t work while I put it in my original file. Here is the attached .grc where I have used vector source as input and multiply a period with 1 and then with zeros on one radio channel and opposite on the other. Can you please have a look, and check if I am doing anything wrong ? Ayaz You're asking us to debug a very complex signal flow. Why don't you try something a *lot* simpler to get the TX-flow-switching-logic correct first, and then work up from there.
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
