Hi all and happy new year,
It is not clear to me if this question is a usrp or gnuradio related so I
send it to both lists. Apologies for the duplication.
----
I have installed a clean version of gnuradio to an ubuntu box
from repos with apt-get.
I then installed from the ettus site the uhd files using:
"Using binaries provided by Ettus Research":
sudo add-apt-repository ppa:ettusresearch/uhd
sudo apt-get update
sudo apt-get install libuhd-dev libuhd003 uhd-host
After trying to communicate with my newly bought X310
I got some error messages about incompatibility of FPGA images that
I fixed with appropriate downloading/burning the new images to FPGA.
Now commands like uhd_find_devices and uhd_usrp_probe work perfectly, eg,
anastas@AA-1:~$ uhd_find_devices
[INFO] [UHD] linux; GNU C++ version 7.3.0; Boost_106501; UHD_3.13.0.1-release
--------------------------------------------------
-- UHD Device 0
--------------------------------------------------
Device Address:
serial: 311D131
addr: 192.168.10.2
fpga: HG
name:
product: X310
type: x300
telling me that I am using UHD_3.13.0.1-release
PROBLEM: however when I run a simple uhd example (eg, uhd_const_wave.py)
I get the following error:
anastas@AA-1:/tmp$ ./uhd_const_wave.py
Warning: failed to XInitThreads()
linux; GNU C++ version 7.3.0; Boost_106501; UHD_003.010.003.000-0-unknown
-- X300 initialization sequence...
-- Determining maximum frame size... 1472 bytes.
-- Setup basic communication...
Traceback (most recent call last):
File "./uhd_const_wave.py", line 203, in <module>
main()
File "./uhd_const_wave.py", line 191, in main
tb = top_block_cls(samp_rate=options.samp_rate, freq=options.freq,
gain=options.gain, address=options.address)
File "./uhd_const_wave.py", line 98, in __init__
channels=range(1),
File "/usr/lib/python2.7/dist-packages/gnuradio/uhd/__init__.py",
line 122, in constructor_interceptor
return old_constructor(*args)
File "/usr/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py",
line 3012, in make
return _uhd_swig.usrp_sink_make(*args)
RuntimeError: RuntimeError: Expected FPGA compatibility number 33, but got 35:
The FPGA image on your device is not compatible with this host code build.
Download the appropriate FPGA images for this version of UHD.
Please run:
"/usr/lib/x86_64-linux-gnu/uhd/utils/uhd_images_downloader.py"
Then burn a new image to the on-board flash storage of your
USRP X3xx device using the image loader utility. Use this command:
"/usr/bin/uhd_image_loader" --args="type=x300,addr=192.168.10.2"
For more information, refer to the UHD manual:
http://files.ettus.com/manual/page_usrp_x3x0.html#x3x0_flash
------------------------------
So it seems that it is using a different uhd library
(UHD_003.010.003.000-0-unknown) than the one I installed from ettus...
How can I fix this?
Thanks
Achilleas
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
