On 04/02/2019 10:04 AM, Chesir, Aaron M. wrote:

Marcus,

I mis-spoke: I am using a common **receiver** application, and I am comparing the received spectrum when using either the N21 or the USRP2 as the transmitter.

Attached are the screen shots of the parameters of the UHD USRP Sink block, which is common when using either of the two boxes to transmit (other than the IP address).

Attached also are the results of executing “uhd_usrp_probe” for each of the two boxes.

I do not understand why I am seeing a healthy spectrum when receiving from the N210 transmitter, but nothing when receiving from the USRP2 transmitter.

Help.

Thanks,

Aaron

You could try swapping the WBX cards between platforms, to see if it's a hardware issue.


*From:*Marcus D. Leech <[email protected]>
*Sent:* Tuesday, April 2, 2019 9:34 AM
*To:* Chesir, Aaron M. <[email protected]>; [email protected]
*Subject:* Re: [EXT] Re: [Discuss-gnuradio] Need support for USRP2

On 04/02/2019 09:20 AM, Chesir, Aaron M. wrote:

    When I generate a known good signal in the ISM band (902 MHz), I
    can use any other receiver with GRC and a good spectrum will be
    displayed. When I use the USRP2 with GRC, to receive and
    characterize energy , GRC offers no complaints, but GRC indicates
    no reception of any signal energy.

What daughtercard do you have installed? What gain setting are you using?



    *From:*Discuss-gnuradio
    <[email protected]>
    <mailto:[email protected]> *On
    Behalf Of *Marcus D. Leech
    *Sent:* Tuesday, April 2, 2019 9:06 AM
    *To:* [email protected] <mailto:[email protected]>
    *Subject:* [EXT] Re: [Discuss-gnuradio] Need support for USRP2

    On 04/02/2019 09:00 AM, Chesir, Aaron M. wrote:

        Folks,

        Apparently the USRP2 is no longer supported by GNUradio Companion.

        Do any of you have the source files that would allow one to
        use gr_modtool to build a GRC block for the USRP2: One to
        transmit and one to receive?

        Thanks,

        Aaron

    That isn't true.  You can even still use USRP1 with Gnu Radio.




        *From:* Discuss-gnuradio
        <[email protected]>
        <mailto:[email protected]>
        *On Behalf Of *Neel Pandeya
        *Sent:* Saturday, March 16, 2019 10:37 PM
        *To:* [email protected] <mailto:[email protected]>
        *Cc:* GNURadio Discussion List <[email protected]>
        <mailto:[email protected]>
        *Subject:* [EXT] Re: [Discuss-gnuradio] forum to learn more
        about signal-processing and SDR ?

        Hello Kristoff:

        These pages have links to resources that might be helpful to you.

        https://kb.ettus.com/Suggested_Videos

        https://kb.ettus.com/Suggested_Reading

        --Neel Pandeya

        On Sat, 16 Mar 2019 at 21:01, Ali Dormiani
        <[email protected] <mailto:[email protected]>> wrote:

            This book is also a great starting point and reference.

            Digital Signal Processing by Oppenheim and Schafer

            Also, here is a fun visual way of getting an alternative
            understanding of Fourier transforms.

            https://www.youtube.com/watch?v=spUNpyF58BY

            Have fun,

            Ali

            On Sat, Mar 16, 2019 at 2:24 PM Albin Stigö
            <[email protected] <mailto:[email protected]>> wrote:

                This book is a very good starting point:

                http://www.dspguide.com

                dsp.stackexchange.com <http://dsp.stackexchange.com>
                is a good place for questions.

                Good luck.

                Albin SM6WJM

                On Sat, Mar 16, 2019, 22:20 Kristoff
                <[email protected] <mailto:[email protected]>> wrote:

                    Hi,


                    One of the reasons I am currently using GNU Radio
                    is to learn more about
                    signal-processing and SDR.

                    As the "discuss-gnuradio" list is about gnuradio
                    itself, what would be a
                    good mailing-list, newsgroup or forum to ask more
                    generic questions
                    about signal-processing?




                    Kristoff (ON1ARF)


                    _______________________________________________
                    Discuss-gnuradio mailing list
                    [email protected]
                    <mailto:[email protected]>
                    https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

                _______________________________________________
                Discuss-gnuradio mailing list
                [email protected] <mailto:[email protected]>
                https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

            _______________________________________________
            Discuss-gnuradio mailing list
            [email protected] <mailto:[email protected]>
            https://lists.gnu.org/mailman/listinfo/discuss-gnuradio





        _______________________________________________

        Discuss-gnuradio mailing list

        [email protected]  <mailto:[email protected]>

        https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

    h


_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Reply via email to