Hi Chris,
You didn't mention your OS or your platform, but this works for a Linux
system:
Using a terminal screen, enter 'aplay -L'
Here is an excerpt from my Raspberry Pi:
"""
default:CARD=ALSA
bcm2835 ALSA, bcm2835 ALSA
Default Audio Device
hw:CARD=ALSA,DEV=1
bcm2835 ALSA, bcm2835 IEC958/HDMI
Direct hardware device without any conversions
hw:CARD=Device,DEV=0
USB Audio Device, USB Audio
Direct hardware device without any conversions
"""
The Pi has a headphone jack, an HDMI port, and I have a USB audio
dongle. What you need to do is pick the appropriate entry for your
system, and the enter the Device Name in the Audio Sink properties. For
example, I use "hw:CARD=ALSA,DEV=1" to get sound on my monitor.
On Windows or Mac, you might just enter "default:CARD=ALSA".
Good luck,
--
Barry Duggan
On Sun, 25 Aug 2019 17:27:31 -0400, Chris Gorman wrote:
Hello All,
I have been hacking at a python script with an attempt to pass two
frequencies to be added to audio sink. I can't seem to get any sound
out of the sound card, though. When I run the script I get "gr::log
:INFO: audio source - Audio sink arch: alsa". The script follows. My
python and QT skills are very poor, I simply started with
gnuradio-companion code and tried to hack the result. Can anyone see
where I might fix this?
Thanks in advance.
Chris
<snip>
_______________________________________________
Discuss-gnuradio mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
