Thank you so much! I will try to implement, and will try to consult you for clarification, thank you for your response sir
On Wed, 30 Oct 2019 at 12:20 AM, Michael Dickens <[email protected]> wrote: > Hi Madhuri - Please keep this discussion on the GR discussion list where > it started: more people reading it increases the chances of someone > providing help! > > Nobody here is going to provide you with the programs as you describe. > This email discussion group is, broadly, about providing advice ... you > have to do the actual work & ask specific enough questions to get > reasonable feedback. You've provided some specifics now, and the best > advice I can give is the following: > > If you look through GNU Radio examples, both from GR itself as well as > "out of tree" (OOT) modules, you'll find some interesting GRC flowgraphs. > None will do -everything- that you're looking out of the box, but you can > piece together enough from various places to do what you want, plus or > minus. > > Cheers! - MLD > > On Tue, Oct 29, 2019 at 11:26 AM Madhuri Gummineni < > [email protected]> wrote: > >> Dear sir, >> i have USRPN210 (UBX Daughterboard ) transceiver . >> If i (from one usrp)send any message say password is -23 >> on the otherside the other usrp should decode it and verify it. if it >> is 23 then it has to hop from f1(96Mhz) to f2(98Mhz) >> >> Therefore it requires two programs >> TX side-grc flowgraph for sending message >> program on RX side >> 1) grc hopping flowgraph for Hopping >> 2) grc flowgraph for decoding (for password verification) >> 3)connecting 1) and 2) to implement it. >> Sir remaining parameters BW-75K, modulation -PSK . >> please guide me sir >> >> Thank you sir >> > -- > Michael Dickens > Ettus Research Technical Support > Email: [email protected] > Web: https://ettus.com/ >
