Hi Jerom, cool! You can, by the way, run Linux in a VM under windows, so that you don't have any risk or permanent investment to use Linux: https://www.virtualbox.org/wiki/Downloads
Best regards, Marcus On Thu, 2020-02-20 at 15:38 +0000, Jerom Maas - LR wrote: > hi Marcus, > Thanks again for the quick reply. > It's good to know that I won't get py3 out of windows GRC. > I'll switch to linux for now. I've not worked with it before, but I'm not > afraid either 😉. > Most important for me is to avoid Py2 if possible. > I'll keep an eye out for possible windows updates in the future. Should you > need a guinea-pc, feel free to contact me. > Thanks for the info, > > Jerom > Van: Müller, Marcus (CEL) <muel...@kit.edu> > Verzonden: donderdag 20 februari 2020 16:24:49 > Aan: michael.dick...@ettus.com; Jerom Maas - LR > CC: discuss-gnuradio@gnu.org > Onderwerp: Re: GRC 3.8 Output language Py2 or Py3 (Windows) > > Ha! Don't get me wrong, it's awesome you're using Windows. > > Now, I don't think Geof came around to building a Python3 GNU Radio, so > you're out of luck for now. You could try your hands on doing that > yourself – follow the link to the Github repo with the source building > scripts – but I'd doubt it's easy :( > > Alternatively: > > Use WSL to run GNU Radio 3.8 on Ubuntu 19.04 or 19.10[1] under windows, > then install GNU Radio 3.8 [2]. Install an X server for windows. > I've had a student that did that and used VS Code on windows to target > his WSL installation, it worked well. > > Or, really, just install a modern Linux (eg. Ubuntu 19.10, Debian) > natively or in a VM for now :) > > As of now, there IS concentrated efforts to improve the windows > situation, but to be honest, it's a strange and confusing and > frustrating world for a lot of us, and I don't even have a single > Windows machine... > > Best regards, > Marcus > > [1] > https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.ubuntu.com_WSL-23Ubuntu-5Fon-5FWSL&d=DwIFaQ&c=XYzUhXBD2cD-CornpT4QE19xOJBbRy-TBPLK0X9U2o8&r=FxwOwDihISw27IZqIUL77cVHQ03qpclxjfkd7WoRAZ8&m=va4bD3iSeVyxTS3NnAN1oTx0C5TfsrYkCr2kFmx24v0&s=2tDf7lNzveWEyNKZWPEZap9kode2wzF1J4qdX4rF6nk&e= > > [2] > https://urldefense.proofpoint.com/v2/url?u=https-3A__launchpad.net_-7Egnuradio_-2Barchive_ubuntu_gnuradio-2Dreleases&d=DwIFaQ&c=XYzUhXBD2cD-CornpT4QE19xOJBbRy-TBPLK0X9U2o8&r=FxwOwDihISw27IZqIUL77cVHQ03qpclxjfkd7WoRAZ8&m=va4bD3iSeVyxTS3NnAN1oTx0C5TfsrYkCr2kFmx24v0&s=LSEvfOORFeBb413MJ14w5snDGugZmuVASEwW9QHMa-A&e= > > On Thu, 2020-02-20 at 15:17 +0000, Jerom Maas - LR wrote: > > Hello Marcus, > > > > that is correct! Sometimes, looking at the help on these forums, I also > > have the feeling that I'm one of the few windows users. > > First of all, a correction: I did not use any .exe, but the file: > > gnuradio_3.8.0.0_win64.msi > > > > I got it from > > https://urldefense.proofpoint.com/v2/url?u=http-3A__www.gcndevelopment.com_gnuradio_downloads.htm&d=DwIFaQ&c=XYzUhXBD2cD-CornpT4QE19xOJBbRy-TBPLK0X9U2o8&r=FxwOwDihISw27IZqIUL77cVHQ03qpclxjfkd7WoRAZ8&m=va4bD3iSeVyxTS3NnAN1oTx0C5TfsrYkCr2kFmx24v0&s=Ia-uzBv1tMkVhBYI2Nrd_k3qtGMkNRaOlveZ79q0yz0&e= > > , downloaded yesterday (feb 19th). > > The file can be found under the 64-Bit Any CPU Windows installer, top link > > - v3.8.0.0/v1.7 BETA > > > > Thank you very much for the help. It's frustrating to be using windows and > > to differ from the linux standards, but looking at the bright side: > > I'm glad to help fixing the last problems for windows users :). > > > > Jerom > > Van: Müller, Marcus (CEL) <muel...@kit.edu> > > Verzonden: donderdag 20 februari 2020 16:11:15 > > Aan: michael.dick...@ettus.com; Jerom Maas - LR > > CC: discuss-gnuradio@gnu.org > > Onderwerp: Re: GRC 3.8 Output language Py2 or Py3 (Windows) > > > > AAAAH you're one of the few windows users; we'll need you to tell us > > *exactly* what you've downloaded! > > > > Best regards, > > Marcus > > > > On Thu, 2020-02-20 at 15:08 +0000, Jerom Maas - LR wrote: > > > Hello Michael, thanks for the quick response! > > > I've just reinstalled GRC, but I've not seen a single option about Py2 or > > > Py3. Maybe it's because I use the .exe installer, that it automatically > > > chooses Py2 then? As said before, I don't even have Py2 installed on my > > > pc. Should I give it a go using Powershell, or try another method? > > > > > > Jerom > > > Van: Michael Dickens <michael.dick...@ettus.com> > > > Verzonden: donderdag 20 februari 2020 15:50:43 > > > Aan: Jerom Maas - LR > > > CC: discuss-gnuradio@gnu.org > > > Onderwerp: Re: GRC 3.8 Output language Py2 or Py3 (Windows) > > > > > > Hi Jerom - I believe GRC outputs Py script based on how GR is installed. > > > Since GR38 can be installed using Py27 or Py3, if it's installed using > > > Py27 then GRC will output for Py27. If installed for Py3 then it'll > > > output for Py3. Pretty sure this is correct. Hence, I'd advise you to > > > check how GR is installed in the first place & if for Py27 then see about > > > getting it installed for Py3. Hope this is useful! - MLD > > > > > > On Thu, Feb 20, 2020 at 9:06 AM Jerom Maas - LR <j.b.m...@tudelft.nl> > > > wrote: > > > > Hello all, > > > > > > > > after installing GRC 3.8, I find that the .py files that are created > > > > from grc are python 2, instead of python 3. > > > > I use Py3 and not Py2, so that's a problem. > > > > How do I change the output language of GRC? If I use the 'option block' > > > > I can only choose 'Python' or ' C++' , but I can't specify the > > > > version of Python. I am using Windows. > > > > > > > > Thanks for your help, > > > > > > > > Jerom Maas > > > > > > > > PS I am not so familiar with C, so if the solution is to alter a bit in > > > > Cmake or something, can you specifically name the file that needs to be > > > > changed? That would be very helpful! > > > > > > > > > > > > > > > > > >
smime.p7s
Description: S/MIME cryptographic signature