Current status on the limeSDR with gnuradio 3.9.3: (1) works with gr-osmosdr using driver=lime,soapy=0 (2) works with the gr-limesdr built from the gr39 branch of https://github.com/daniestevez/gr-limesdr/tree/gr39 (3) works as expected with SoapySDRUtil (4) does NOT work with gr-soapy lime-sdr source block (5) rtl dongle works with the gr-soapy rtl-sdr source block.
On 2021-10-10 5:00 p.m., Aardric wrote: > Hail, > My rtl-sdr soapy source block runs with attached hardware but > running the flow graph with the lime source block throws out the > unpleasant response: > > File "./test39_lime-sdr.py", line 88, in __init__ > stream_args, tune_args, settings) > RuntimeError: SoapySDR::Device::make() no match > > > SoapySDRUtil --find="driver=lime" > ###################################################### > ## Soapy SDR -- the SDR abstraction library ## > ###################################################### > > Found device 0 > addr = 1d50:6108 > driver = lime > label = LimeSDR-USB [USB 3.0] 9081C05C4212E > media = USB 3.0 > module = FX3 > name = LimeSDR-USB > serial = 0009081C05C4212E > > > --init-- > self.soapy_limesdr_source_0 = None > dev = 'driver=lime' > stream_args = '' > tune_args = [''] > settings = [''] > > self.soapy_limesdr_source_0 = soapy.source(dev, "fc32", 1, > "driver='lime'",stream_args, tune_args, settings) > > I don't know why the dev_args input of "driver='lime'" is required. > > git branch gnuradio 3.9-maint > built with PyBOMBS (on 2021-10-09) > opensuse Leap 15.2. > > The web page https://wiki.gnuradio.org/index.php/Soapy was informative > but didn't tell me where to go next with this. Before I begin the > daunting (for a non-developer) task of exploring more deeply, I thought > to query this forum for obvious suggestions or known solution (or bug > status). > > Rick >
