You have to set the spectrum width to half in the gui frequency sink block.
The fftsize should be 32 256 512 1024 2048 4096 .....
In the example you mentioned, the fftsize is set to 2048.
-- Volker
I was learning about the sampling rate by looking into the
tutorial provided in the GNURadio wiki
URL: https://wiki.gnuradio.org/index.php/Sample_Rate_Tutorial
<https://wiki.gnuradio.org/index.php/Sample_Rate_Tutorial>
When I was trying to replicate the flowgraph in my 3.8.2.0 version of
GNURadio. I got an FFT size error message:
return _qtgui_swig.freq_sink_f_make(fftsize, wintype, fc, bw, name,
nconnections, parent)
RuntimeError: freq_sink: FFT size must be > 16 and < 16384.
Then I tried to increase the FFT size to 17 and then the flowgraph was
executed but the flowgraph was not the same as shown in the example.
Attaching the flowgraph for the reference
My question is whether I have built the flowgraph in the wrong manner or
is it with the GNURadio 3.8 issue??
Regards
Ярослав
