Apologies for the extra email but this is the command I am using to build
the docker:
sudo docker build -t ubuntu:gnuradio-releases-3.8 .
Thanks,
Caden
On Sat, Jul 22, 2023 at 1:16 AM Caden O'Donnell <[email protected]> wrote:
> When trying to build osmocom, following the directions on the
> github/website, I encountered an error that stopped me from finishing the
> cmake.
>
> -- Installation is located at: /usr/local
> -- Build type not specified: defaulting to release.
> -- Checking for module 'mpir >= 3.0'
> -- No package 'mpir' found
> -- Could NOT find MPIR (missing: MPIRXX_LIBRARY MPIR_LIBRARY
> MPIR_INCLUDE_DIR)
> -- User set python executable /usr/bin/python3
> -- Found PythonLibs: /usr/lib/x86_64-linux-gnu/libpython3.8.so (found
> suitable exact version "3.8.10")
> -- Extracting version information from git describe...
> -- Could NOT find gnuradio-blocks (missing: gnuradio-blocks_DIR)
> -- Found Block Block: 0
> -- Checking for module 'gnuradio-iqbalance'
> -- No package 'gnuradio-iqbalance' found
> -- Could NOT find GNURADIO_IQBALANCE (missing:
> GNURADIO_IQBALANCE_LIBRARIES GNURADIO_IQBALANCE_INCLUDE_DIRS)
> -- Found gnuradio-uhd: /usr/include,
> /usr/lib/x86_64-linux-gnu/libgnuradio-uhd.so
> -- Checking for module 'libosmosdr'
> -- No package 'libosmosdr' found
> -- libosmosdr not found.
> -- Checking for module 'librtlsdr'
> -- No package 'librtlsdr' found
> -- librtlsdr not found.
> -- Checking for module 'libmirisdr'
> -- No package 'libmirisdr' found
> -- libmirisdr not found.
> -- Checking for module 'libairspy'
> -- No package 'libairspy' found
> -- Could NOT find LIBAIRSPY (missing: LIBAIRSPY_LIBRARIES
> LIBAIRSPY_INCLUDE_DIRS)
> -- Checking for module 'libbladeRF'
> -- No package 'libbladeRF' found
> -- libbladeRF not found.
> -- Checking for module 'libfreesrp'
> -- No package 'libfreesrp' found
> -- libfreesrp not found.
> -- Found PythonLibs: /usr/lib/x86_64-linux-gnu/libpython3.8.so (found
> version "3.8.10")
> --
> -- Checking for module SWIG
> -- Found SWIG version 4.0.1.
> -- Minimum SWIG version required is 1.3.31
> --
> -- The build system will automatically enable all components.
> -- Use -DENABLE_DEFAULT=OFF to disable components by default.
> --
> -- Configuring Python support support...
> -- Dependency PYTHONLIBS_FOUND = TRUE
> -- Dependency SWIG_FOUND = TRUE
> -- Dependency SWIG_VERSION_CHECK = TRUE
> -- Enabling Python support support.
> -- Override with -DENABLE_PYTHON=ON/OFF
> --
> -- Configuring high resolution timing...
> -- High resolution timing supported through clock_gettime.
> --
> -- Configuring Osmocom IQ Imbalance Correction support...
> -- Dependency GNURADIO_IQBALANCE_FOUND = FALSE
> -- Disabling Osmocom IQ Imbalance Correction support.
> -- Override with -DENABLE_IQBALANCE=ON/OFF
> --
> -- Configuring sysmocom OsmoSDR support...
> -- Dependency LIBOSMOSDR_FOUND = FALSE
> -- Disabling sysmocom OsmoSDR support.
> -- Override with -DENABLE_OSMOSDR=ON/OFF
> --
> -- Configuring IQ File Source & Sink support...
> -- Dependency GNURADIO_BLOCKS_FOUND =
> -- Disabling IQ File Source & Sink support.
> -- Override with -DENABLE_FILE=ON/OFF
> --
> -- Configuring Osmocom RTLSDR support...
> -- Dependency LIBRTLSDR_FOUND = FALSE
> -- Disabling Osmocom RTLSDR support.
> -- Override with -DENABLE_RTL=ON/OFF
> --
> -- Configuring RTLSDR TCP Client support...
> -- Dependency GNURADIO_BLOCKS_FOUND =
> -- Disabling RTLSDR TCP Client support.
> -- Override with -DENABLE_RTL_TCP=ON/OFF
> --
> -- Configuring Ettus USRP Devices support...
> -- Dependency UHD_FOUND = TRUE
> -- Dependency GNURADIO_UHD_FOUND = TRUE
> -- Enabling Ettus USRP Devices support.
> -- Override with -DENABLE_UHD=ON/OFF
> --
> -- Configuring Osmocom MiriSDR support...
> -- Dependency LIBMIRISDR_FOUND = FALSE
> -- Disabling Osmocom MiriSDR support.
> -- Override with -DENABLE_MIRI=ON/OFF
> --
> -- Configuring HackRF & rad1o Badge support...
> -- Dependency LIBHACKRF_FOUND = TRUE
> -- Enabling HackRF & rad1o Badge support.
> -- Override with -DENABLE_HACKRF=ON/OFF
> -- HackRF multiple device support enabled
> --
> -- Configuring nuand bladeRF support...
> -- Dependency LIBBLADERF_FOUND = FALSE
> -- Disabling nuand bladeRF support.
> -- Override with -DENABLE_BLADERF=ON/OFF
> --
> -- Configuring RFSPACE Receivers support...
> -- Enabling RFSPACE Receivers support.
> -- Override with -DENABLE_RFSPACE=ON/OFF
> --
> -- Configuring AIRSPY Receiver support...
> -- Dependency LIBAIRSPY_FOUND = FALSE
> -- Disabling AIRSPY Receiver support.
> -- Override with -DENABLE_AIRSPY=ON/OFF
> --
> -- Configuring SoapySDR support support...
> -- Dependency SoapySDR_FOUND = 1
> -- Enabling SoapySDR support support.
> -- Override with -DENABLE_SOAPY=ON/OFF
> --
> -- Configuring Red Pitaya SDR support...
> -- Enabling Red Pitaya SDR support.
> -- Override with -DENABLE_REDPITAYA=ON/OFF
> --
> -- Configuring FreeSRP support support...
> -- Dependency LIBFREESRP_FOUND = FALSE
> -- Disabling FreeSRP support support.
> -- Override with -DENABLE_FREESRP=ON/OFF
> --
> -- ######################################################
> -- # gr-osmosdr enabled components
> -- ######################################################
> -- * Python support
> -- * Ettus USRP Devices
> -- * HackRF & rad1o Badge
> -- * RFSPACE Receivers
> -- * SoapySDR support
> -- * Red Pitaya SDR
> --
> -- ######################################################
> -- # gr-osmosdr disabled components
> -- ######################################################
> -- * Osmocom IQ Imbalance Correction
> -- * sysmocom OsmoSDR
> -- * IQ File Source & Sink
> -- * Osmocom RTLSDR
> -- * RTLSDR TCP Client
> -- * Osmocom MiriSDR
> -- * nuand bladeRF
> -- * AIRSPY Receiver
> -- * FreeSRP support
> --
> -- Building for version: v0.1.4-143-g8cd65e60 / 0.1.5git
> -- Using install prefix: /usr/local
> -- Configuring done
> CMake Error at lib/CMakeLists.txt:272 (ADD_LIBRARY):
> Target "gnuradio-osmosdr" links to target "gnuradio::gnuradio-blocks" but
> the target was not found. Perhaps a find_package() call is missing for
> an
> IMPORTED target, or an ALIAS target is missing?
>
>
> CMake Error at /usr/lib/x86_64-linux-gnu/cmake/gnuradio/UseSWIG.cmake:573
> (add_library):
> Target "osmosdr_swig" links to target "gnuradio::gnuradio-blocks" but the
> target was not found. Perhaps a find_package() call is missing for an
> IMPORTED target, or an ALIAS target is missing?
> Call Stack (most recent call first):
> /usr/lib/x86_64-linux-gnu/cmake/gnuradio/GrSwig.cmake:133
> (swig_add_library)
> swig/CMakeLists.txt:53 (GR_SWIG_MAKE)
>
>
> -- Generating done
> CMake Generate step failed. Build files cannot be regenerated correctly.
>
> I have gnuradio 3.8 installed through apt-get install and did "git
> checkout gr3.8" so the osmocom should be on the right version. However I do
> not know how to debug cmake files and even though it seems like it cannot
> find the gnuradio blocks, I don't know how to include this directory. Also
> I believe the only thing I need is the HackRF so if the others are disabled
> that is okay right?
>
> If you would like to use it, I am appending the dockerfile that I am using.
>
> Thanks for all the help,
> Caden
>
> On Wed, Jul 19, 2023 at 11:08 PM Caden O'Donnell <[email protected]>
> wrote:
>
>> Hello,
>>
>> I am putting gnuradio companion into a docker however I am unable for it
>> to give me a HackRF source/sink block. I am installing libsoapysdr-dev and
>> libhackrf-dev before building gnuradio (this is all on an ubuntu docker so
>> I am using apt-get) however it does not create soapy HackRF blocks. Any
>> help would be appreciated.
>>
>> Thanks,
>> Caden O'Donnell
>>
>
