Hi Franco, I’m following your instructions for sdrplay3 and seem to be missing libsdrplay
What’s the best way to install that? Thanks Glen This is on the latest Raspberry pi 5 OS > On Oct 17, 2024, at 9:52 PM, Franco VENTURI <fvent...@comcast.net> wrote: > > Yuhe, I think gr-osmosdr was the old way to interface an SDR with GNU Radio. > With recent versions of GNU Radio you may want to use one of these two ways: > - gr-soapy, which is an in-tree module and should be part of GNU Radio > 3.10.10 - gr-sdrplay3, which is an out-of-tree module I wrote; it uses > directly the SDRplay API to connect to your RSP (i.e. it does not require > SoapySDR or the SoapySDRPlay3 module). You can find the OOT module > 'gr-sdrplay3' here: https://github.com/fventuri/gr-sdrplay3 I'll be happy > to help you if you have any questions. Franco >> >> On 10/17/2024 9:36 PM EDT 徐雨荷 <yuh...@mails.jlu.edu.cn> wrote: >> I’m not sure this is where I should be asking this question but here >> goes. >> I try to read the data of SDRplay on GNUradio, but it shows an error. It >> thinks there is something wrong with the installation or configuration of my >> USB device driver and communication is not possible.But SDRuno software can >> be used to read data normally, what should I do now? I hope I can get some >> help.Attached below is the error report from GNUradio. Yuhe gr-osmosdr >> 0.2.0.0 (0.2.0) gnuradio 3.10.10.0 >> built-in source types: file rtl rtl_tcp uhd miri hackrf bladerf airspy >> airspyhf soapy redpitaya >> [INFO] [UHD] Win32; Microsoft Visual C++ version 14.2; Boost_108200; >> UHD_4.6.0.0-release >> [WARNING] Unable to scan local: -19 >> libusb: info [get_guid] no DeviceInterfaceGUID registered for >> 'USB\VID_2717&PID_5023\7&27C58F36&0&2' >> libusb: info [get_guid] no DeviceInterfaceGUID registered for >> 'USB\VID_3277&PID_0029\0001' >> libusb: info [get_guid] no DeviceInterfaceGUID registered for >> 'USB\VID_2717&PID_5023&MI_01\8&F29D925&0&0001' >> libusb: info [get_guid] no DeviceInterfaceGUID registered for >> 'USB\VID_05E3&PID_0610\6&72FCEC3&0&2' >> libusb: info [get_guid] no DeviceInterfaceGUID registered for >> 'USB\VID_2717&PID_5023&MI_00\8&F29D925&0&0000' >> libusb: info [get_guid] no DeviceInterfaceGUID registered for >> 'USB\VID_05E3&PID_0625\6&72FCEC3&0&4' >> libusb: info [get_guid] no DeviceInterfaceGUID registered for >> 'USB\ROOT_HUB30\5&292403F0&0&0' >> libusb: info [get_guid] no DeviceInterfaceGUID registered for >> 'USB\VID_13D3&PID_3563\000000000' >> libusb: info [get_guid] no DeviceInterfaceGUID registered for >> 'USB\VID_3277&PID_0029&MI_00\7&18314511&0&0000' >> libusb: info [get_guid] no DeviceInterfaceGUID registered for >> 'USB\ROOT_HUB30\5&14F916E1&0&0' >> libusb: info [get_guid] no DeviceInterfaceGUID registered for >> 'USB\ROOT_HUB30\5&33507A3D&0&0' >> libusb: info [get_guid] no DeviceInterfaceGUID registered for >> 'USB\VID_1A40&PID_0101\7&27C58F36&0&1' >> libusb: info [get_guid] no DeviceInterfaceGUID registered for >> 'USB\VID_13D3&PID_3563&MI_00\7&1D754FA2&0&0000' >> libusb: info [get_guid] no DeviceInterfaceGUID registered for >> 'USB\VID_0951&PID_1666\80C5F274C4DA159098360041' >> [WARNING] Unable to scan ip: -19 >> [INFO] Using format CF32. >>
